Another one for in the pan... Don't make it harder then it needs to be. Seems thats the trend these days

Exactly!

For those keeping count at home that makes 7 that have said put the sensor in the pan where it belongs.

quote:

Originally posted by Hammertime:
http://www.jegs.com/i/NOS/741/16104/10002/-1


This isn't uncommon to try either, temp sensors in both line (or cooler) and trans pan at the same time.

I use similar fittings and have temp and pressure sensors.







I would think for bracket racing a sensor in the pan, won't tell you much about your transmission, but will reflect on the efficiency of your cooler......which would lend itself to consistency.



.