Billet 1350 pinion yoke showed up today, waiting on a friend to deliver BMR upper and lower tubular A arm and a Borgenson manual steering box kit, idler arm and steering components kit and Hotchkis front, rear sway bar kit from JEGS.

It'll be down to wheels, brakes and possibly front springs, I gotta look at those when I get em out.

Gonna be a nice BBC pump gas street car.

Sure that's a billet yoke?

Reliable right around the corner from Sunshine built this beauty, Sonnax billet TH400 yoke 1350.

Big Block strong.

They did a nice job on it.

Is that red foam stuff hung under it from the cone killings ?

Footbrake ARB 71 Split Bumper. 1.65 60ft.

This message has been edited. Last edited by: Mike Rietow,

Before BMR tubular upper and lower control arms, Aerospace brakes, Mopar master cylinder, JEGS Borgenson manual steering box kit.

Hotchkis sway bar definitely the best quality I found (mechanically sound design) , but FEDEX did a number on the box, missing a lot of its hardware.

Holding up progress now.

71 split bumper front end, ever piece new. Steering side and suspension.

Heavy duty BMR

BMR, same as I run on The Ripper. Excellent product & customer service.

This message has been edited. Last edited by: Mike Rietow,

She a dirty lil thang... they said she was a basket case....

watch this

RIPPER footbraker 71 Split bumper BBC Camaro

This message has been edited. Last edited by: Mike Rietow,

Goodies

ProForged, definitely recommend these steering components from JEGS.

Nice!

Coated

This message has been edited. Last edited by: Mike Rietow,

JEGS Borgenson Saginaw 525 quick ratio manual steering box

I was so impressed by this Pro Forged drag link, steering kit and Saginaw-Borgenson quick ratio manual steering box, that I had to order it for the Ripper too.

Nice chit, real nice, coated.

Down to bolting on the spindles, front coil springs, Aerospace brakes, wheels and tires, Dakota digital dashboard, brake lines and Front end alignment.

This message has been edited. Last edited by: Mike Rietow,

71 Split bumper mania!

Mike, do you have a link to the source for the steering components you used? I am in the process of rebuilding my 77 camaro for brackets/ little street use, and will at some point need all these same parts.