Billet 1350 pinion yoke showed up today, waiting on a friend to deliver BMR upper and lower tubular A arm and a Borgenson manual steering box kit, idler arm and steering components kit and Hotchkis front, rear sway bar kit from JEGS.
It'll be down to wheels, brakes and possibly front springs, I gotta look at those when I get em out.
Gonna be a nice BBC pump gas street car.
October 20, 2021, 12:55 AM
imakehp
Sure that's a billet yoke?
. Dave
F J B
October 20, 2021, 06:35 PM
Mike Rietow
Reliable right around the corner from Sunshine built this beauty, Sonnax billet TH400 yoke 1350.
Big Block strong.
They did a nice job on it.
October 21, 2021, 04:59 PM
Mike Rietow
October 21, 2021, 05:29 PM
67TSCHEVY2
Is that red foam stuff hung under it from the cone killings ?
October 21, 2021, 11:04 PM
Mike Rietow
October 22, 2021, 02:17 PM
Mike Rietow
Footbrake ARB 71 Split Bumper. 1.65 60ft.
This message has been edited. Last edited by: Mike Rietow,
October 22, 2021, 02:42 PM
Mike Rietow
Before BMR tubular upper and lower control arms, Aerospace brakes, Mopar master cylinder, JEGS Borgenson manual steering box kit.
October 23, 2021, 12:08 AM
Mike Rietow
Hotchkis sway bar definitely the best quality I found (mechanically sound design) , but FEDEX did a number on the box, missing a lot of its hardware.
Holding up progress now.
October 23, 2021, 02:55 PM
Mike Rietow
71 split bumper front end, ever piece new. Steering side and suspension.
Heavy duty BMR
October 24, 2021, 08:57 PM
Mike Rietow
BMR, same as I run on The Ripper. Excellent product & customer service.
This message has been edited. Last edited by: Mike Rietow,
October 26, 2021, 12:32 PM
Mike Rietow
She a dirty lil thang... they said she was a basket case....
watch this
October 26, 2021, 07:27 PM
Mike Rietow
RIPPER footbraker 71 Split bumper BBC Camaro
This message has been edited. Last edited by: Mike Rietow,
October 27, 2021, 02:04 PM
Mike Rietow
Goodies
October 28, 2021, 02:48 PM
Mike Rietow
ProForged, definitely recommend these steering components from JEGS.
Nice!
Coated
This message has been edited. Last edited by: Mike Rietow,
October 28, 2021, 06:43 PM
Mike Rietow
JEGS Borgenson Saginaw 525 quick ratio manual steering box
October 30, 2021, 12:51 PM
Mike Rietow
I was so impressed by this Pro Forged drag link, steering kit and Saginaw-Borgenson quick ratio manual steering box, that I had to order it for the Ripper too.
Nice chit, real nice, coated.
October 31, 2021, 08:48 PM
Mike Rietow
Down to bolting on the spindles, front coil springs, Aerospace brakes, wheels and tires, Dakota digital dashboard, brake lines and Front end alignment.
This message has been edited. Last edited by: Mike Rietow,
November 17, 2021, 05:35 PM
Mike Rietow
71 Split bumper mania!
November 17, 2021, 08:24 PM
Wooley
Mike, do you have a link to the source for the steering components you used? I am in the process of rebuilding my 77 camaro for brackets/ little street use, and will at some point need all these same parts.
This message has been edited. Last edited by: 
This message has been edited. Last edited by: 
This message has been edited. Last edited by: 
This message has been edited. Last edited by: 
