Search Results

DragRaceResults.Com

Bracket Talk

Bracket Talk Forum

Search Results

‹ Previous | Next ›

New

Find

Tools

Personal Zone	»
Member Directory
Bracket Talk Forum	»

Discussion	»
Poll	»
Private Message
Photo Album	»

Help

RE: Bypass jet size (in Tech Talk - by Abruzzi) by SP 124X The bypass jet primarily controls the idle pressure. It can effect the main pressure of it's too la...... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi RE: Bypass jet size (in Tech Talk - by Abruzzi) by Paul Dilley Gday, I have an apd belt pump and external bypass reg. This is how I set mine, I set it up on the be...... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi RE: Bypass jet size (in Tech Talk - by Abruzzi) by rusty i would back out on the adjuster ,it doesnt matter what they said but what it takes to make it work....... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi RE: Bypass jet size (in Tech Talk - by Abruzzi) by vetman Ya well that was where APD said to set it was ok untill you went full throttle then wham fuel would ...... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi RE: Bypass jet size (in Tech Talk - by Abruzzi) by SP 124X I've never been able to run that much fuel pressure at 4500 rpm on any of my stuff big block or smal...... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi RE: Bypass jet size (in Tech Talk - by Abruzzi) by rusty is your pump the one with the holley looking adjustment on top/are you 2 to 1 on pulleys.is your adj...... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi RE: Bypass jet size (in Tech Talk - by Abruzzi) by vetman Three different gauges new carbs had them apart new blp needles an seats but at full throttle it wou...... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi RE: Bypass jet size (in Tech Talk - by Abruzzi) by 329L Are the Floats in good shape? The pressures you are seeing are fine, IF the gauge is accurate.... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi RE: Bypass jet size (in Tech Talk - by Abruzzi) by vetman Sorry forgot to say its on alky and it sets up ok got to 8psi at the recomended 4500 rpm and 3 psi i...... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi RE: Bypass jet size (in Tech Talk - by Abruzzi) by Triple Nickel What's the problem? If it has too much pressure put a bigger jet, if too little put a smaller one. ...... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi Bypass jet size (in Tech Talk - by Abruzzi) by vetman Anybody know what bypass jet size is on a APD internal bypass belt drive pump used on a 350 inch sma...... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi RE: No Time for Discussion, Debating, Keyboarding or Whatever on DRR. Talk about racing! (in General Discussion - by FTI) by seabass ...... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > General Discussion - by FTI RE: No Time for Discussion, Debating, Keyboarding or Whatever on DRR. Talk about racing! (in General Discussion - by FTI) by Tex013 lots of racing for you guys and gals . We are mostly lucky to run once a month . In saying that Im b...... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > General Discussion - by FTI RE: No Time for Discussion, Debating, Keyboarding or Whatever on DRR. Talk about racing! (in General Discussion - by FTI) by B KING TnT this Fri. I'll be working on 1/8-mile strategy. Points race on Sat. if it doesn't rain. The plan...... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > General Discussion - by FTI Insurance..... (in General Discussion - by FTI) by imakehp I was just reading about all the benefits the government is giving the foreign invaders/illegals. It...... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > General Discussion - by FTI Unleaded Race Fuel (in Tech Talk - by Abruzzi) by B KING Anybody running unleaded race fuel in their rides? I've been running Sunoco 260 GT 100 octane stree...... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi RE: Raffle (in General Discussion - by FTI) by B KING No problem! I saw you were at least entered in #19 with no luck. They should have more raffles at ...... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > General Discussion - by FTI RE: Raffle (in General Discussion - by FTI) by THE HAMMER Thanks B KING.... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > General Discussion - by FTI RE: Raffle (in General Discussion - by FTI) by B KING ...... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > General Discussion - by FTI RE: Raffle (in General Discussion - by FTI) by THE HAMMER Well ,where do you find out who won in the 20 catagories?... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > General Discussion - by FTI RE: Raffle (in General Discussion - by FTI) by B KING Yes... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > General Discussion - by FTI Raffle (in General Discussion - by FTI) by THE HAMMER Have the Raffles been picked for the Million yet?... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > General Discussion - by FTI RE: Delay Box Racing... (in Tech Talk - by Abruzzi) by ski_dwn_it Why not just get in the habit of always putting in the correct opponents dial? Makes you pay atten...... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi RE: Delay Box Racing... (in Tech Talk - by Abruzzi) by Goob ...... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi RE: Delay Box Racing... (in Tech Talk - by Abruzzi) by fuzzy dice I made my maiden voyage last weekend at Gainesville...top is very different than bottom..lol..I ran ...... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi RE: Delay Box Racing... (in Tech Talk - by Abruzzi) by TonyB6255 If you are ever the faster car and cross over, make sure you zero out the opponent before you get ou...... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi RE: Delay Box Racing... (in Tech Talk - by Abruzzi) by AlkyIROC I always put 000 for my opponent and just go off my own light. Never correct for a slow reaction tim...... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi RE: Delay Box Racing... (in Tech Talk - by Abruzzi) by 183N Suppose it kind of depends on the box… With my mega 450 I press clear for opponent dial so that’s z...... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi 421 sbc with 177 weiand blower wont idle down (in Tech Talk - by Abruzzi) by td9757 421 sbc with 177 weiand blower wont idle down, i changed from a untuned 1050 holley alky carb they h...... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi carolina coalition (in General Discussion - by FTI) by dragkid1990 has there ever been any thought into bringing back the old carolina coalition series from back in th...... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > General Discussion - by FTI RE: Cam id help (in Tech Talk - by Abruzzi) by Goob Ultradyne ?... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi RE: Cam id help (in Tech Talk - by Abruzzi) by deadon1578 Find a machine shop with a Cam Doctor, it will check the cam and print out all the info!... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi RE: Cam id help (in Tech Talk - by Abruzzi) by Brandon@BTE Cam Dynamics?... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi Cam id help (in Tech Talk - by Abruzzi) by excessive braker Working on 406 SBC and having trouble figuring out which cam is in this sucker so I figured I'd ask ...... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi RE: Spring Fling Million (in General Discussion - by FTI) by B KING Last year we missed the Million race(s) due to my dad's health & passing. This year our 12.5-year-ol...... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > General Discussion - by FTI RE: Spring Fling Million (in General Discussion - by FTI) by The Hawk Will be good to see you again Chris!... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > General Discussion - by FTI Oil Restrictors Rodeck SBC (in Tech Talk - by Abruzzi) by Curly1 409 Aluminum Rodeck motor I am playing with. Bought this thing because guy could not use it as it wa...... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi RE: 632 Blueprint Engine (in Tech Talk - by Abruzzi) by Busted Knuckles One of the Blueprint engineers posted casting material tensile and Brinnel specs on the Chevelles.co...... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi RE: 632 Blueprint Engine (in Tech Talk - by Abruzzi) by Brad Owens Thank you all for your response.... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi RE: 632 Blueprint Engine (in Tech Talk - by Abruzzi) by bry-war That's great news about the size of the pocket. Appreciate your reply.... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi RE: 632 Blueprint Engine (in Tech Talk - by Abruzzi) by CSRacing ...... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi RE: 632 Blueprint Engine (in Tech Talk - by Abruzzi) by bry-war With a 1.54 valve spring pocket what is your lift and usable rpm for that head?TIA... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi Killing ivy w/ vinegar ? (in General Discussion - by FTI) by imakehp Of the people that use vinegar to kill ivy, has anyone noticed a difference in 30% vs 45% strength v...... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > General Discussion - by FTI TAKE A LOOK AT THIS (in General Discussion - by FTI) by J178RED ...... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > General Discussion - by FTI RE: Republicans are a joke...... (in Politics and more Politics) by Goob ...... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Politics and more Politics RE: Republicans are a joke...... (in Politics and more Politics) by Bill Koski Who saw the story about the TERRORIST ATTACK in Russia where they live in a police state with govern...... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Politics and more Politics RE: Republicans are a joke...... (in Politics and more Politics) by Bill Koski As one more Republican Speaker’s spine collapses and he passesa a cave in POS with the demon-0RATS!!...... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Politics and more Politics Precision reaction (in Tech Talk - by Abruzzi) by Goob I got the gadget, install is very straight forward and easy, got a few (4) runs on it to get the tir...... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi Too much difference? (in Tech Talk - by Abruzzi) by Ron Gusack Mounted some Mickey's and checked circumference. Mickey says 1/2" is max allowable. I have 98 7/8 an...... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi hrbor frieght jacks (in Tech Talk - by Abruzzi) by wideopen231 Hvae to but new jack to start season with. Wouldn't be bad if can end season with same one. Hd craft...... DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi	» Refine Search » New Search

RE: Bypass jet size (in Tech Talk - by Abruzzi) by SP 124X
The bypass jet primarily controls the idle pressure. It can effect the main pressure of it's too la......
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi

RE: Bypass jet size (in Tech Talk - by Abruzzi) by Paul Dilley
Gday, I have an apd belt pump and external bypass reg. This is how I set mine, I set it up on the be......
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi

RE: Bypass jet size (in Tech Talk - by Abruzzi) by rusty
i would back out on the adjuster ,it doesnt matter what they said but what it takes to make it work.......
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi

RE: Bypass jet size (in Tech Talk - by Abruzzi) by vetman
Ya well that was where APD said to set it was ok untill you went full throttle then wham fuel would ......
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi

RE: Bypass jet size (in Tech Talk - by Abruzzi) by SP 124X
I've never been able to run that much fuel pressure at 4500 rpm on any of my stuff big block or smal......
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi

RE: Bypass jet size (in Tech Talk - by Abruzzi) by rusty
is your pump the one with the holley looking adjustment on top/are you 2 to 1 on pulleys.is your adj......
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi

RE: Bypass jet size (in Tech Talk - by Abruzzi) by vetman
Three different gauges new carbs had them apart new blp needles an seats but at full throttle it wou......
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi

RE: Bypass jet size (in Tech Talk - by Abruzzi) by 329L
Are the Floats in good shape? The pressures you are seeing are fine, IF the gauge is accurate....
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi

RE: Bypass jet size (in Tech Talk - by Abruzzi) by vetman
Sorry forgot to say its on alky and it sets up ok got to 8psi at the recomended 4500 rpm and 3 psi i......
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi

RE: Bypass jet size (in Tech Talk - by Abruzzi) by Triple Nickel
What's the problem? If it has too much pressure put a bigger jet, if too little put a smaller one. ......
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi

Bypass jet size (in Tech Talk - by Abruzzi) by vetman
Anybody know what bypass jet size is on a APD internal bypass belt drive pump used on a 350 inch sma......
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi

RE: No Time for Discussion, Debating, Keyboarding or Whatever on DRR. Talk about racing! (in General Discussion - by FTI) by seabass
......
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > General Discussion - by FTI

RE: No Time for Discussion, Debating, Keyboarding or Whatever on DRR. Talk about racing! (in General Discussion - by FTI) by Tex013
lots of racing for you guys and gals . We are mostly lucky to run once a month . In saying that Im b......
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > General Discussion - by FTI

RE: No Time for Discussion, Debating, Keyboarding or Whatever on DRR. Talk about racing! (in General Discussion - by FTI) by B KING
TnT this Fri. I'll be working on 1/8-mile strategy. Points race on Sat. if it doesn't rain. The plan......
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > General Discussion - by FTI

Insurance..... (in General Discussion - by FTI) by imakehp
I was just reading about all the benefits the government is giving the foreign invaders/illegals. It......
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > General Discussion - by FTI

Unleaded Race Fuel (in Tech Talk - by Abruzzi) by B KING
Anybody running unleaded race fuel in their rides? I've been running Sunoco 260 GT 100 octane stree......
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi

RE: Raffle (in General Discussion - by FTI) by B KING
No problem! I saw you were at least entered in #19 with no luck. They should have more raffles at ......
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > General Discussion - by FTI

RE: Raffle (in General Discussion - by FTI) by THE HAMMER
Thanks B KING....
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > General Discussion - by FTI

RE: Raffle (in General Discussion - by FTI) by B KING
......
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > General Discussion - by FTI

RE: Raffle (in General Discussion - by FTI) by THE HAMMER
Well ,where do you find out who won in the 20 catagories?...
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > General Discussion - by FTI

RE: Raffle (in General Discussion - by FTI) by B KING
Yes...
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > General Discussion - by FTI

Raffle (in General Discussion - by FTI) by THE HAMMER
Have the Raffles been picked for the Million yet?...
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > General Discussion - by FTI

RE: Delay Box Racing... (in Tech Talk - by Abruzzi) by ski_dwn_it
Why not just get in the habit of always putting in the correct opponents dial? Makes you pay atten......
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi

RE: Delay Box Racing... (in Tech Talk - by Abruzzi) by Goob
......
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi

RE: Delay Box Racing... (in Tech Talk - by Abruzzi) by fuzzy dice
I made my maiden voyage last weekend at Gainesville...top is very different than bottom..lol..I ran ......
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi

RE: Delay Box Racing... (in Tech Talk - by Abruzzi) by TonyB6255
If you are ever the faster car and cross over, make sure you zero out the opponent before you get ou......
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi

RE: Delay Box Racing... (in Tech Talk - by Abruzzi) by AlkyIROC
I always put 000 for my opponent and just go off my own light. Never correct for a slow reaction tim......
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi

RE: Delay Box Racing... (in Tech Talk - by Abruzzi) by 183N
Suppose it kind of depends on the box… With my mega 450 I press clear for opponent dial so that’s z......
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi

421 sbc with 177 weiand blower wont idle down (in Tech Talk - by Abruzzi) by td9757
421 sbc with 177 weiand blower wont idle down, i changed from a untuned 1050 holley alky carb they h......
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi

carolina coalition (in General Discussion - by FTI) by dragkid1990
has there ever been any thought into bringing back the old carolina coalition series from back in th......
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > General Discussion - by FTI

RE: Cam id help (in Tech Talk - by Abruzzi) by Goob
Ultradyne ?...
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi

RE: Cam id help (in Tech Talk - by Abruzzi) by deadon1578
Find a machine shop with a Cam Doctor, it will check the cam and print out all the info!...
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi

RE: Cam id help (in Tech Talk - by Abruzzi) by Brandon@BTE
Cam Dynamics?...
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi

Cam id help (in Tech Talk - by Abruzzi) by excessive braker
Working on 406 SBC and having trouble figuring out which cam is in this sucker so I figured I'd ask ......
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi

RE: Spring Fling Million (in General Discussion - by FTI) by B KING
Last year we missed the Million race(s) due to my dad's health & passing. This year our 12.5-year-ol......
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > General Discussion - by FTI

RE: Spring Fling Million (in General Discussion - by FTI) by The Hawk
Will be good to see you again Chris!...
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > General Discussion - by FTI

Oil Restrictors Rodeck SBC (in Tech Talk - by Abruzzi) by Curly1
409 Aluminum Rodeck motor I am playing with. Bought this thing because guy could not use it as it wa......
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi

RE: 632 Blueprint Engine (in Tech Talk - by Abruzzi) by Busted Knuckles
One of the Blueprint engineers posted casting material tensile and Brinnel specs on the Chevelles.co......
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi

RE: 632 Blueprint Engine (in Tech Talk - by Abruzzi) by Brad Owens
Thank you all for your response....
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi

RE: 632 Blueprint Engine (in Tech Talk - by Abruzzi) by bry-war
That's great news about the size of the pocket. Appreciate your reply....
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi

RE: 632 Blueprint Engine (in Tech Talk - by Abruzzi) by CSRacing
......
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi

RE: 632 Blueprint Engine (in Tech Talk - by Abruzzi) by bry-war
With a 1.54 valve spring pocket what is your lift and usable rpm for that head?TIA...
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi

Killing ivy w/ vinegar ? (in General Discussion - by FTI) by imakehp
Of the people that use vinegar to kill ivy, has anyone noticed a difference in 30% vs 45% strength v......
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > General Discussion - by FTI

TAKE A LOOK AT THIS (in General Discussion - by FTI) by J178RED
......
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > General Discussion - by FTI

RE: Republicans are a joke...... (in Politics and more Politics) by Goob
......
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Politics and more Politics

RE: Republicans are a joke...... (in Politics and more Politics) by Bill Koski
Who saw the story about the TERRORIST ATTACK in Russia where they live in a police state with govern......
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Politics and more Politics

RE: Republicans are a joke...... (in Politics and more Politics) by Bill Koski
As one more Republican Speaker’s spine collapses and he passesa a cave in POS with the demon-0RATS!!......
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Politics and more Politics

Precision reaction (in Tech Talk - by Abruzzi) by Goob
I got the gadget, install is very straight forward and easy, got a few (4) runs on it to get the tir......
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi

Too much difference? (in Tech Talk - by Abruzzi) by Ron Gusack
Mounted some Mickey's and checked circumference. Mickey says 1/2" is max allowable. I have 98 7/8 an......
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi

hrbor frieght jacks (in Tech Talk - by Abruzzi) by wideopen231
Hvae to but new jack to start season with. Wouldn't be bad if can end season with same one. Hd craft......
DragRaceResults.Com > Bracket Talk > Bracket Talk Forum > Tech Talk - by Abruzzi

» Refine Search
» New Search

‹ Previous | Next ›

Please Wait. Your request is being processed...

DragRaceResults.Com

Bracket Talk

Bracket Talk Forum

Search Results

	View $GS_USERNAME's Public Profile
	Add $GS_USERNAME to my Buddies
	Add $GS_USERNAME to my Ignore ListRemove $GS_USERNAME from my Ignore List
	Invite $GS_USERNAME to a Private Topic
	View Recent Posts by $GS_USERNAME
	Notify me of New Posts by $GS_USERNAME