quote:

Originally posted by 1320racer:


Now Go ahead show us all your bracket racing wins. Post all your big checks and Wally’s or STFU!

DID YOU REALLY JUST POST THIS?????? YOU HAVE GOT TO BE KIDDING, YOU HAVE ZERO RIGHT TO ASK ANYONE UNTIL YOU PROVIDE THE FOLLOWING (YOU KNOW, THE "NOT ED LIST"):

So before you say anything about anyone else being a nobody then answer the following PRIOR: Tell everyone on here:
1. how many divisional races have you won
2. how many big money bracket races have you won, IE larger than $3k to win
3. how many Divisional Championships have you won
4. how many rounds have you gone at the biggest and best race in the world over the last 10 years, yes "little man" that would be the Million.
5. How many track championships have you won in foot-brake and electronics?

All the above DETERMINES your skill set and everyone else's measuring stick on what you actually know. Because if you can't even apply it yourself and make it work then why would anyone think it is anything more than BS

And don't see this forum isn't about that because the quote above was yours. So if you say it is so also state how much of a puzzy Hypocrite you are as well.

This message has been edited. Last edited by: The Bozman,

Good ol' Ed Kardashian...doing LESS with MORE daily!!!

Loads up the nicest shyt on the planet into the nicest trailer ever built...after yet ANOTHER first round runner-up finish.

Too bad money can't buy talent. Or friends.

But don't feel bad, little feller, you are in the running with your big sister Kim for most pics of the same old shyt on a single thread.

She does have you beat pretty soundly in the a$$ and boobs department, you're going to have to pony up for more DQ ice cream if you're going to have a shot at that.

If all you have going for you in real life is running at a hole in the wall track in a class where people go take a pizz while your class is running . About all a little hoe can do is get with the men on social media and sling some c r a p against the wall . Sure he knew he was gonna get his b i t c h azz slapped around . But he can't make it in Top Sportsman , JJ the Boss told him to come back when he has something that will run . Big Chief has a new girl , My Jenny hasn't seen the bird in years . Doc + Reaper might want their man boobs rubbed .. so theirs always hope for Edweird and 2019 ... but until then there is only the buyback window , G a y pride and the corndog stand ..

Maybe....those new headers can make the gay pride 500 plus inch all aftermarket engined Firebird run quicker than the peanut port 470 inch Q-Jet equipped, flattop pistoned SS/GTA, naw probably not so much. Like Busted Knuckles and Tube Carz sez..........theres always the buy back window and shopping for bras at Macy's.

This message has been edited. Last edited by: VORTECPRO,

TUBIE knows

Bender knows

Curly 1 knows

Bozman knows

SP310G knows

Whomper knows

EP knows

IP DAILY knows

Rob Robertson knows

Imakehp knows

XPS fan knows

Steven Hughes knows

Will Harrison knows

VORTECPRO knows

Busted Knuckles knows

Did I miss anyone? Surely I did...can they all be wrong?

^^^^sounds like the ceo and chief officers of the clueless nobody corporation??^^^

Jenevet clearly dont know...lmfao

quote:

Originally posted by jenavet:
^^^^sounds like the ceo and chief officers of the clueless nobody corporation??^^^

add pathetic and jealous.

jenavet...KNOWS!


Again, this shyt show was of course started by a hater who was so determined, so desperate to find fault with these custom built headers and still all he could comment about was a tack weld on the underside of a flange, same tack welds seen on many headers including every pair of Dynatech dragster headers on the majority of dragsters in the lanes at every track in the country except their tacks are on the top, bottom and both sides as well the headers are not welded completely around each tube to the flange and the haters, several of which ain't got shyt nor done shyt, continue to post their jealously driven diatribe of hate.

quote:

Originally posted by XPS fan:
Now you know why I don't post many pics of header, chassis, or any other builds in the shop.......nothing is perfect.

Back again to this thread about headers, specifically headers built for my bracket car by the guy I commissioned to build them, a guy that comes highly recommended by many stock/super stock racers. Headers that are exactly what I wanted, in material, workmanship, fit and finish.

They should perform exactly the same as the set they were copied from. The only difference is the tubing thickness with this set being heavier gauge. IIRC, went from 18 gauge to 16. Don't need no lite weight headers, ain't racing class. Previous set was built in 2004 and started to crack in 2016. Wheels up launches and a heavy collector hanging off them take their toll.









Thanks again, to Greg Holman aka REF Unlimited in Kingman, AZ. and Gene Schaffer aka Central Connecticut Coatings.

If you have a need for either or both, give them a call, you won't be disappointed in the workmanship, quality, lead time or price.

quote:

Originally posted by J178RED:
A lot of buddies have used him, and everyone just raves about him. I think he is a real artists, seen some stuff that looks great and performs better than you can imagine. he is very good

quote:

Originally posted by "The Bender":
They do look good in the pictures.

quote:

Originally posted by Wooley:
Very nice

quote:

Originally posted by pauley:
headers look pretty good to me. they are nicer than most and for sure mine.

quote:

Originally posted by bbtommyd:
They made headers for my dragster last October. They are the best set I've owned. bar none.

quote:

Originally posted by jenavet:
those headers look great all cleaned up and coated!!

That said, 11,000+ views on our way to 12,000 about just another set of mild steel coated headers!

This message has been edited. Last edited by: 1320racer,

The only thing more wore out than 1Ed saying "so and so KNOWS" is 1Eds mangina.

quote:

Originally posted by TORQIN:
Jenevet clearly dont know...lmfao

Thanks for the big laugh today!!!!

Poor Mikey!!! and it's not even Wednesday yet!

I’m pretty sure I just saw a picture of Ed posted over on the Yellowbullet in the No bra thread.

quote:

Originally posted by T/D6591:
I’m pretty sure I just saw a picture of Ed posted over on the Yellowbullet in the No bra thread.

Do you need bleach for your eyes?

It wasn't 1Ed, it was Vern Troyer. Honest mistake

quote:

Originally posted by "The Bender":

quote:

Originally posted by T/D6591:
I’m pretty sure I just saw a picture of Ed posted over on the Yellowbullet in the No bra thread.

Do you need bleach for your eyes?

Bender I don't think so , he was welding at the time and still had the shield down.....

quote:

Originally posted by 1320racer:

Again, this shyt show was of course started by a hater who was so dete ...

Is that what you think ?
Is that what your candy azz thinks ?

This thread has nothing to do with your G A Y PRIDE PARADE car . Your H O M O H E A Ders or your pealing next year rattle can coating ... No it has everything to do with putting the smackdown on your CANDY AZZ .... !

^^^says the redneck dirtbag who ain't got shyt nor done shyt!


Again, this shyt show was of course started by a hater who was so determined, so desperate to find fault with these custom built headers and still all he could comment about was a tack weld on the underside of a flange, same tack welds seen on many headers including every pair of Dynatech dragster headers on the majority of dragsters in the lanes at every track in the country except their tacks are on the top, bottom and both sides as well the headers are not welded completely around each tube to the flange and the haters, several of which ain't got shyt nor done shyt, continue to post their jealously driven diatribe of hate.

quote:

Originally posted by XPS fan:
Now you know why I don't post many pics of header, chassis, or any other builds in the shop.......nothing is perfect.

Back again to this thread about headers, specifically headers built for my bracket car by the guy I commissioned to build them, a guy that comes highly recommended by many stock/super stock racers. Headers that are exactly what I wanted, in material, workmanship, fit and finish.

They should perform exactly the same as the set they were copied from. The only difference is the tubing thickness with this set being heavier gauge. IIRC, went from 18 gauge to 16. Don't need no lite weight headers, ain't racing class. Previous set was built in 2004 and started to crack in 2016. Wheels up launches and a heavy collector hanging off them take their toll.









Thanks again, to Greg Holman aka REF Unlimited in Kingman, AZ. and Gene Schaffer aka Central Connecticut Coatings.

If you have a need for either or both, give them a call, you won't be disappointed in the workmanship, quality, lead time or price.

quote:

Originally posted by J178RED:
A lot of buddies have used him, and everyone just raves about him. I think he is a real artists, seen some stuff that looks great and performs better than you can imagine. he is very good

quote:

Originally posted by "The Bender":
They do look good in the pictures.

quote:

Originally posted by Wooley:
Very nice

quote:

Originally posted by pauley:
headers look pretty good to me. they are nicer than most and for sure mine.

quote:

Originally posted by bbtommyd:
They made headers for my dragster last October. They are the best set I've owned. bar none.

quote:

Originally posted by jenavet:
those headers look great all cleaned up and coated!!

That said, 12,000+ views on our way to 13,000 about just another set of mild steel coated headers!

This message has been edited. Last edited by: 1320racer,

quote:

Originally posted by J178RED:

quote:

Originally posted by "The Bender":

quote:

Originally posted by T/D6591:
I’m pretty sure I just saw a picture of Ed posted over on the Yellowbullet in the No bra thread.

Do you need bleach for your eyes?

Bender I don't think so , he was welding at the time and still had the shield down.....

Thank goodness for that dark shield.

It appears lil' ed has finally ran out of bullshyt to spew...

All he can do now is repost the same thing over and over..

The only value man boobs ever had was entertaining us with his clown act. But if I want reruns I'll turn on the TV.
He needs to sell something so he can buy something new to brag about...



.

Yup^^^^^

He'll never sell those cars unless he puts a few more facts in the ad.
Like..... "And please don't blame the cars for never winning rounds, much less a race"



.