Headers - Topic

DRR Elite

posted

Thanks.

Great job done by Greg Holman aka REF Unlimited in Kingman, AZ. and made shiny by Gene Schaffer aka Central Connecticut Coatings.

21,000+ views on our way to 22,000 about just another set of mild steel coated headers! Dancing Cat

Posts: 13522 | Location: NJ | Registered: August 20, 2000

Ignored post by 1320racer posted

Wooley

DRR Sportsman

posted

You may want to get that hole in the diaper patched. It would be a real shame if the motor broke and the diaper tore/failed due to that. Very clean car btw. That's nice.

Posts: 517 | Location: Going to or returning from the chipmine. | Registered: July 01, 2011

Ignored post by Wooley posted

DRR Elite

posted

Thanks. There's no hole in the diaper, btw.

Posts: 13522 | Location: NJ | Registered: August 20, 2000

Ignored post by 1320racer posted

Stephen Hughes

DRR Sportsman

posted

That’s a tight squeeze, not much room for error there. Builder did a nice job!!

The Pull-Out....for when you want to work smarter, not harder!!!

Posts: 337 | Location: Texas | Registered: September 12, 2005

Ignored post by Stephen Hughes posted

DRR Elite

posted

He sure did including making the tweaks I requested in pipes 1-3-5 and 6-8

Posts: 13522 | Location: NJ | Registered: August 20, 2000

Ignored post by 1320racer posted

dag 1821

DRR Trophy

posted

tethers ?

Posts: 19 | Location: florida | Registered: December 02, 2014

Ignored post by dag 1821 posted

DRR Elite

posted

not yet

23,000+ views on our way to 24,000 about just another set of mild steel coated headers! Dancing Cat

Posts: 13522 | Location: NJ | Registered: August 20, 2000

Ignored post by 1320racer posted

DRR Elite

posted

24,000+ views on our way to 25,000 about just another set of mild steel coated headers! Dancing Cat

Posts: 13522 | Location: NJ | Registered: August 20, 2000

Ignored post by 1320racer posted

DRR Elite

posted

quote:
Originally posted by XPS fan:
I would be inclined to be more interested in how your new headers perform.

quote:
Originally posted by 1320racer:
Fred, they should perform exactly the same as the set they were copied from. The only difference is the tubing thickness with this set being heavier gauge. IIRC, went from 18 gauge to 16. Don't need no lite weight headers, ain't racing class.

Made 4 passes on Saturday, no difference in performance as I expected.

Godspeed Fred

Posts: 13522 | Location: NJ | Registered: August 20, 2000

Ignored post by 1320racer posted