Page 1 ... 55 56 57 58 59 60 61 ... 170
Go
New
Find
Notify
Tools
Reply
  
“The Bender”
 Login/Join
 
DRR S/Pro
Picture of "The Bender"
posted Hide Post
12° Profilers, 2000#

How about a .932 60', Mike?


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
 
Posts: 3103 | Location: Yes | Registered: July 08, 2009Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
quote:
Originally posted by jenavet:
3.73 out of a measly 540 with conventional heads?i think there is more to this story,unless that thing weighs 1750 fully loaded


It is a blower motor after all and now the secret's out that "Big Daddy" is in his corner...so who knows what kind of super secret stuff those two have been up to????
 
Posts: 457 | Location: coquille,or | Registered: November 18, 2003Reply With QuoteReport This Post
DRR Elite
posted Hide Post
quote:
Originally posted by TORQIN:
We sell, rent, repair, and calibrate torque tools 3/4" drive and above.

www.torquetoolsinc.com

Shameless plug...


I believe ours at work is a Hytorc. Some jobs we just have no other option.


Foxtrot Juliet Bravo
 
Posts: 6462 | Location: Illinois | Registered: July 08, 2004Reply With QuoteReport This Post
DRR S/Pro
Picture of XPS fan
posted Hide Post
quote:
Originally posted by TORQIN:
We sell, rent, repair, and calibrate torque tools 3/4" drive and above.

www.torquetoolsinc.com

Shameless plug...




That's interesting stuff .... plug or not.


I'm on the other end of the spectrum, looking for low torque cordless that is accurate and will repeat. Range 40-100 ft lbs for clutch hats, converters, trans parts.



.


NHRA Pro Stock..........now on a no CARB diet.
 
Posts: 2764 | Location: ohio | Registered: February 21, 2006Reply With QuoteReport This Post
DRR Pro
Picture of TORQIN
posted Hide Post
quote:
Originally posted by Bucky:
quote:
Originally posted by TORQIN:
We sell, rent, repair, and calibrate torque tools 3/4" drive and above.

www.torquetoolsinc.com

Shameless plug...


I believe ours at work is a Hytorc. Some jobs we just have no other option.


I worked for that company 12 years before starting on my own 14 years ago. Remember this world is held together by nuts and bolts...Big ones too!

XPS, can be done quicker with an air tool...RAD 350SL : https://torquetoolsinc.com/pro...d/pneumatic/classic/

This message has been edited. Last edited by: TORQIN,
 
Posts: 1754 | Location: Houston, Tx. | Registered: November 27, 2008Reply With QuoteReport This Post
DRR S/Pro
posted Hide Post
quote:
Originally posted by TORQIN:
quote:
Originally posted by Bucky:
quote:
Originally posted by TORQIN:
We sell, rent, repair, and calibrate torque tools 3/4" drive and above.

www.torquetoolsinc.com

Shameless plug...


I believe ours at work is a Hytorc. Some jobs we
just have no other option.


I worked for that company 12 years before
starting on my own 14 years ago. Remember this
world is held together by nuts and bolts...Big ones too!

XPS, can be done quicker with an air tool...RAD 350SL : https://torquetoolsinc.com/pro...d/pneumatic/classic/


Torqin, would a torque stick work for what XPS wants?


California Screaming!
Raceless in California!
 
Posts: 4680 | Location: Vacaville  | Registered: January 07, 2004Reply With QuoteReport This Post
DRR Pro
Picture of TORQIN
posted Hide Post
yes without a doubt, at that torque level it's most commonly done with a hand torque tool.
 
Posts: 1754 | Location: Houston, Tx. | Registered: November 27, 2008Reply With QuoteReport This Post



DRR S/Pro
Picture of XPS fan
posted Hide Post
Trouble with hand tool.......getting tougher to get them in there with all the new design dbl frame rails and midplate bracing.


Barry......hadn't thought about a torque stick.....thanks!



.


NHRA Pro Stock..........now on a no CARB diet.
 
Posts: 2764 | Location: ohio | Registered: February 21, 2006Reply With QuoteReport This Post
DRR S/Pro
posted Hide Post
quote:
Originally posted by XPS fan:
Trouble with hand tool.......getting tougher to get them in there with all the new design dbl frame rails and midplate bracing.


Barry......hadn't thought about a torque stick.....thanks!



.


Cool! I can actually think about race things now!


California Screaming!
Raceless in California!
 
Posts: 4680 | Location: Vacaville  | Registered: January 07, 2004Reply With QuoteReport This Post
DRR S/Pro
Picture of "The Bender"
posted Hide Post
This thread has really taken on a new twist........

clapping


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
 
Posts: 3103 | Location: Yes | Registered: July 08, 2009Reply With QuoteReport This Post
DRR S/Pro
posted Hide Post
quote:
Originally posted by "The Bender":
This thread has really taken on a new twist........

clapping



Drums... and a cymbal clapping


California Screaming!
Raceless in California!
 
Posts: 4680 | Location: Vacaville  | Registered: January 07, 2004Reply With QuoteReport This Post
DRR S/Pro
Picture of "The Bender"
posted Hide Post
https://youtu.be/9CdVTCDdEwI


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
 
Posts: 3103 | Location: Yes | Registered: July 08, 2009Reply With QuoteReport This Post
DRR S/Pro
posted Hide Post
LMAO...


California Screaming!
Raceless in California!
 
Posts: 4680 | Location: Vacaville  | Registered: January 07, 2004Reply With QuoteReport This Post
DRR S/Pro
Picture of "The Bender"
posted Hide Post
I'll be here all week, don't forget to tip your waitress.....................


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
 
Posts: 3103 | Location: Yes | Registered: July 08, 2009Reply With QuoteReport This Post



DRR S/Pro
Picture of J178RED
posted Hide Post
I know its not lunch yet, But could I get a bacon cheese burger and a chocolate shake... Please.... Relaxing


HAVE THEY CALLED US YET ? THEY HAVE!!!
 
Posts: 2698 | Location: OLD NICK OUT ON THE TRACK OR IN THE DESERT | Registered: March 09, 2010Reply With QuoteReport This Post
DRR S/Pro
Picture of "The Bender"
posted Hide Post
It's lunchtime where I'm at!


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
 
Posts: 3103 | Location: Yes | Registered: July 08, 2009Reply With QuoteReport This Post
DRR Pro
Picture of T/D6591
posted Hide Post
You're out to lunch. HMMMM


 
Posts: 1708 | Location: Portland,Oregon | Registered: January 18, 2009Reply With QuoteReport This Post
DRR S/Pro
Picture of J178RED
posted Hide Post
WELL THEN.... I'll take my order Now... Please You Da Man ...


HAVE THEY CALLED US YET ? THEY HAVE!!!
 
Posts: 2698 | Location: OLD NICK OUT ON THE TRACK OR IN THE DESERT | Registered: March 09, 2010Reply With QuoteReport This Post
DRR S/Pro
Picture of "The Bender"
posted Hide Post
quote:
Originally posted by T/D6591:
You're out to lunch. HMMMM


Perpetually
Uncontrollable Laugh


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
 
Posts: 3103 | Location: Yes | Registered: July 08, 2009Reply With QuoteReport This Post
DRR Pro
Picture of T/D6591
posted Hide Post
Dancing Cat sorry i just like the cat.


 
Posts: 1708 | Location: Portland,Oregon | Registered: January 18, 2009Reply With QuoteReport This Post
  Powered by Social Strata Page 1 ... 55 56 57 58 59 60 61 ... 170 
 


© DragRaceResults.com 2024