Page 1 ... 54 55 56 57 58 59 60 ... 170
Go
New
Find
Notify
Tools
Reply
  
“The Bender”
 Login/Join
 
DRR Pro
Picture of T/D6591
posted Hide Post
quote:
Originally posted by "The Bender":
quote:
Originally posted by T/D6591:
Where are the pictures of your new race car parts Bender? Crazy Driver


This looks like a lot of hot air.


 
Posts: 1708 | Location: Portland,Oregon | Registered: January 18, 2009Reply With QuoteReport This Post
DRR S/Pro
Picture of "The Bender"
posted Hide Post
There aint any hot air around here today......
Weather


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
 
Posts: 3103 | Location: Yes | Registered: July 08, 2009Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
quote:
Originally posted by "The Bender":


Don't think you will have any problem making minimum weight with that combo.

Looks like it may have a bit more torque off the line too. Might want to consider going up a size or two on the rear tires.
 
Posts: 457 | Location: coquille,or | Registered: November 18, 2003Reply With QuoteReport This Post
DRR S/Pro
Picture of J178RED
posted Hide Post
quote:
Originally posted by "The Bender":
quote:
Originally posted by J178RED:
I've heard of downsizing but.... what's the length of those rods ? And how low will the RPM be..... Holy Moly


I'm currently looking for .65 rear gears
Uncontrollable Laugh


Wallace Calculator indicted you would need .54 with your combo as it sits now...

Snap out of it


HAVE THEY CALLED US YET ? THEY HAVE!!!
 
Posts: 2698 | Location: OLD NICK OUT ON THE TRACK OR IN THE DESERT | Registered: March 09, 2010Reply With QuoteReport This Post
DRR S/Pro
Picture of "The Bender"
posted Hide Post
But remember, I'm only running 1/8th mile....


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
 
Posts: 3103 | Location: Yes | Registered: July 08, 2009Reply With QuoteReport This Post
DRR Pro
Picture of TORQIN
posted Hide Post
How much torque on the rod bolts? That's big chit!!
 
Posts: 1754 | Location: Houston, Tx. | Registered: November 27, 2008Reply With QuoteReport This Post
DRR Pro
Picture of T/D6591
posted Hide Post
Where is this thread heading? All this talk about Brian’s crank or rod is just crazy. Blue Man


 
Posts: 1708 | Location: Portland,Oregon | Registered: January 18, 2009Reply With QuoteReport This Post



DRR S/Pro
Picture of J178RED
posted Hide Post
quote:
Originally posted by TORQIN:
How much torque on the rod bolts? That's big chit!!


Need a new torque wrench for sure mine is only 3/8 , do they make an 1" ???? Help


HAVE THEY CALLED US YET ? THEY HAVE!!!
 
Posts: 2698 | Location: OLD NICK OUT ON THE TRACK OR IN THE DESERT | Registered: March 09, 2010Reply With QuoteReport This Post
DRR Pro
Picture of T/D6591
posted Hide Post
Next you will be needing Bubba to pull on that torque wrench.


 
Posts: 1708 | Location: Portland,Oregon | Registered: January 18, 2009Reply With QuoteReport This Post
DRR S/Pro
Picture of J178RED
posted Hide Post
quote:
Originally posted by T/D6591:
Next you will be needing Bubba to pull on that torque wrench.


Bubba and a friend or two.... I only work as a supervisor ....


HAVE THEY CALLED US YET ? THEY HAVE!!!
 
Posts: 2698 | Location: OLD NICK OUT ON THE TRACK OR IN THE DESERT | Registered: March 09, 2010Reply With QuoteReport This Post
DRR Pro
Picture of TORQIN
posted Hide Post
quote:
Originally posted by J178RED:
quote:
Originally posted by TORQIN:
How much torque on the rod bolts? That's big chit!!


Need a new torque wrench for sure mine is only 3/8 , do they make an 1" ???? Help


1" pfft oh yes we have 1" 1 1/2" 2 1/2" and 3 1/2" drive tools up to 80,000 ft lbs.

Large air/electric and hydraulic tools is what I have done most of my adult career...we bust big azz nuts baby! I have tools to torque those rod bolts...
 
Posts: 1754 | Location: Houston, Tx. | Registered: November 27, 2008Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
Now that's a torque monster!!!!
 
Posts: 701 | Location: At the beach | Registered: August 05, 2003Reply With QuoteReport This Post
DRR Pro
Picture of TORQIN
posted Hide Post
We sell, rent, repair, and calibrate torque tools 3/4" drive and above.

www.torquetoolsinc.com

Shameless plug...
 
Posts: 1754 | Location: Houston, Tx. | Registered: November 27, 2008Reply With QuoteReport This Post
DRR S/Pro
Picture of J178RED
posted Hide Post
quote:
Originally posted by TORQIN:
We sell, rent, repair, and calibrate torque tools 3/4" drive and above.

www.torquetoolsinc.com

Shameless plug...



Is this stuff all Ed approved....LOL


HAVE THEY CALLED US YET ? THEY HAVE!!!
 
Posts: 2698 | Location: OLD NICK OUT ON THE TRACK OR IN THE DESERT | Registered: March 09, 2010Reply With QuoteReport This Post



DRR Pro
Picture of TORQIN
posted Hide Post
Umm prolly not cause he won't look at this thread right?
 
Posts: 1754 | Location: Houston, Tx. | Registered: November 27, 2008Reply With QuoteReport This Post
DRR S/Pro
Picture of "The Bender"
posted Hide Post
quote:
Originally posted by TORQIN:
We sell, rent, repair, and calibrate torque tools 3/4" drive and above.

www.torquetoolsinc.com

Shameless plug...


I always thought you were a nut buster!
Uncontrollable Laugh

Way better that a, eh hmm.....nut hanger!


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
 
Posts: 3103 | Location: Yes | Registered: July 08, 2009Reply With QuoteReport This Post
DRR Pro
Picture of TORQIN
posted Hide Post
Spent a lot of my life Torqin and nut bustin...

Cool
 
Posts: 1754 | Location: Houston, Tx. | Registered: November 27, 2008Reply With QuoteReport This Post
DRR S/Pro
Picture of "The Bender"
posted Hide Post
Hence the screen name......


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
 
Posts: 3103 | Location: Yes | Registered: July 08, 2009Reply With QuoteReport This Post
DRR Pro
posted Hide Post
3.73 out of a measly 540 with conventional heads?i think there is more to this story,unless that thing weighs 1750 fully loaded
 
Posts: 1433 | Location: united states | Registered: January 16, 2006Reply With QuoteReport This Post
DRR Pro
Picture of T/D6591
posted Hide Post
quote:
Originally posted by jenavet:
3.73 out of a measly 540 with conventional heads?i think there is more to this story,unless that thing weighs 1750 fully loaded
Who said conventional heads? Brian is pretty light,well compared to me anyway.


 
Posts: 1708 | Location: Portland,Oregon | Registered: January 18, 2009Reply With QuoteReport This Post
  Powered by Social Strata Page 1 ... 54 55 56 57 58 59 60 ... 170 
 


© DragRaceResults.com 2024