January 04, 2018, 10:45 AM
T/D6591“The Bender”
quote:
Originally posted by "The Bender":
quote:
Originally posted by T/D6591:
Where are the pictures of your new race car parts Bender?
This looks like a lot of hot air.
January 04, 2018, 11:06 AM
"The Bender"There aint any hot air around here today......
272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'
2017 Bradenton Heads Up Madness
Open Outlaw Champ
2018 PDRA T/D #5
2019 PDRA T/D #2
2020 Retired From T/D Competition....
2020 Bradenton NMCA Hemi Shootout Winner
2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
January 04, 2018, 03:17 PM
Joe Burkleoquote:
Originally posted by "The Bender":
Don't think you will have any problem making minimum weight with that combo.
Looks like it may have a bit more torque off the line too. Might want to consider going up a size or two on the rear tires.
January 04, 2018, 10:00 PM
J178REDquote:
Originally posted by "The Bender":
quote:
Originally posted by J178RED:
I've heard of downsizing but.... what's the length of those rods ? And how low will the RPM be.....
I'm currently looking for .65 rear gears
Wallace Calculator indicted you would need .54 with your combo as it sits now...
HAVE THEY CALLED US YET ? THEY HAVE!!!
January 05, 2018, 06:31 AM
"The Bender"But remember, I'm only running 1/8th mile....
272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'
2017 Bradenton Heads Up Madness
Open Outlaw Champ
2018 PDRA T/D #5
2019 PDRA T/D #2
2020 Retired From T/D Competition....
2020 Bradenton NMCA Hemi Shootout Winner
2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
January 05, 2018, 07:14 AM
TORQINHow much torque on the rod bolts? That's big chit!!
January 05, 2018, 11:53 AM
T/D6591Where is this thread heading? All this talk about Brian’s crank or rod is just crazy.
January 05, 2018, 12:01 PM
J178REDquote:
Originally posted by TORQIN:
How much torque on the rod bolts? That's big chit!!
Need a new torque wrench for sure mine is only 3/8 , do they make an 1" ????
HAVE THEY CALLED US YET ? THEY HAVE!!!
January 05, 2018, 01:53 PM
T/D6591Next you will be needing Bubba to pull on that torque wrench.
January 05, 2018, 01:57 PM
J178REDquote:
Originally posted by T/D6591:
Next you will be needing Bubba to pull on that torque wrench.
Bubba and a friend or two.... I only work as a supervisor ....
HAVE THEY CALLED US YET ? THEY HAVE!!!
January 05, 2018, 02:16 PM
TORQINquote:
Originally posted by J178RED:
quote:
Originally posted by TORQIN:
How much torque on the rod bolts? That's big chit!!
Need a new torque wrench for sure mine is only 3/8 , do they make an 1" ????
1" pfft oh yes we have 1" 1 1/2" 2 1/2" and 3 1/2" drive tools up to 80,000 ft lbs.
Large air/electric and hydraulic tools is what I have done most of my adult career...we bust big azz nuts baby! I have tools to torque those rod bolts...
January 05, 2018, 02:20 PM
maliciousintentNow that's a torque monster!!!!
January 05, 2018, 02:35 PM
TORQINWe sell, rent, repair, and calibrate torque tools 3/4" drive and above.
www.torquetoolsinc.comShameless plug...
January 05, 2018, 02:38 PM
J178REDquote:
Originally posted by TORQIN:
We sell, rent, repair, and calibrate torque tools 3/4" drive and above.
www.torquetoolsinc.comShameless plug...
Is this stuff all Ed approved....LOL
HAVE THEY CALLED US YET ? THEY HAVE!!!
January 05, 2018, 04:17 PM
TORQINUmm prolly not cause he won't look at this thread right?
January 05, 2018, 04:24 PM
"The Bender"quote:
Originally posted by TORQIN:
We sell, rent, repair, and calibrate torque tools 3/4" drive and above.
www.torquetoolsinc.comShameless plug...
I always thought you were a nut buster!
Way better that a, eh hmm.....nut hanger!
272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'
2017 Bradenton Heads Up Madness
Open Outlaw Champ
2018 PDRA T/D #5
2019 PDRA T/D #2
2020 Retired From T/D Competition....
2020 Bradenton NMCA Hemi Shootout Winner
2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
January 05, 2018, 05:31 PM
TORQINSpent a lot of my life Torqin and nut bustin...
January 05, 2018, 07:14 PM
"The Bender"Hence the screen name......
272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'
2017 Bradenton Heads Up Madness
Open Outlaw Champ
2018 PDRA T/D #5
2019 PDRA T/D #2
2020 Retired From T/D Competition....
2020 Bradenton NMCA Hemi Shootout Winner
2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
January 05, 2018, 09:18 PM
jenavet3.73 out of a measly 540 with conventional heads?i think there is more to this story,unless that thing weighs 1750 fully loaded
January 05, 2018, 09:22 PM
T/D6591quote:
Originally posted by jenavet:
3.73 out of a measly 540 with conventional heads?i think there is more to this story,unless that thing weighs 1750 fully loaded
Who said conventional heads? Brian is pretty light,well compared to me anyway.