DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Air Pressure Recommendations
Go
New
Find
Notify
Tools
Reply
  
Air Pressure Recommendations
 Login/Join
 
DRR S/Pro
Picture of "The Bender"
posted
I will be getting my bracket ride to the the track in the next month or so and would like ideas on what pressure to run in my slicks.

Running a Hoosier 28x10.5x15 D07 on an 8" wide wheel (couldn't fit a 10" wheel). Car is about 3000#, PG, Trans Brake 1.80 1st, 4.30 rear. Mild motor probably 550-600HP on a good day.

Thoughts?


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
 
Posts: 3100 | Location: Yes | Registered: July 08, 2009Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
I would start at 10.5 and have a helper vidio it up close -the tire that is -playback slowmo you know what it should look like-60 fts. will tell ya also


The difference between ignorance and stupidity. Ignorance is lack of knowledge. Stupidity is the inability to learn. Don't be stupid
 
Posts: 408 | Location: des moines iowa | Registered: January 10, 2020Reply With QuoteReport This Post
DRR Sportsman
Picture of FootbrakeJim
posted Hide Post
I was going to say 11-11.5, which worked for me on a nearly identical setup, but my wheels were 10" wide with 10.5's. After re-reading your post, with a wheel width 2-2.5" narrower than the tire, it will take a lower pressure to achieve the right footprint. So I will say X2 to Vetmans recommended 10.5 PSI for a starting point. (If it was an 8 inch slick on a 10 inch wheel, I'd go 12.5).


Dan "Jim" Moore
Much too young to feel this damn old!!
 
Posts: 1039 | Location: Farmersville, TX  | Registered: December 05, 2002Reply With QuoteReport This Post
DRR Pro
Picture of Eman
posted Hide Post
I run 10.5 on a 10" wheel 12.5 to 13PSI others go 16psi+
 
Posts: 1462 | Location: E TN | Registered: February 13, 2009Reply With QuoteReport This Post
DRR Top Comp
posted Hide Post
quote:
Originally posted by FootbrakeJim:
I was going to say 11-11.5, which worked for me on a nearly identical setup, but my wheels were 10" wide with 10.5's. After re-reading your post, with a wheel width 2-2.5" narrower than the tire, it will take a lower pressure to achieve the right footprint. So I will say X2 to Vetmans recommended 10.5 PSI for a starting point. (If it was an 8 inch slick on a 10 inch wheel, I'd go 12.5).


X3
 
Posts: 9398 | Location: Madeira Beach Fl. | Registered: June 12, 2018Reply With QuoteReport This Post
DRR Pro
Picture of W.A.O. 111
posted Hide Post
All you had to do is call me , you know I know everything g about things



 photo wao-painting-logo-1_zpse0a5ba9f.jpg


 
Posts: 338 | Location: chiefland fl. | Registered: March 06, 2011Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Air Pressure Recommendations

© DragRaceResults.com 2024