 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
Go | New | Find | Notify | Tools | Reply | |
| starter repair | Login/Join |
DRR Top Comp |
Did all of that guys. Thanks for reply.I was hoping I was having a brain **** and doing something wrong. Damn be right all the time sucks Even grounded to motor ground with 0 cable to make sure good ground. Nothing responds. Like always when I break it I break it good. Will try east coast tomorrow and see wht they say. If nothing I guess I will be ordering another in morning. America home of free. Brought to you by 2nd amendment. | |||
|
| DRR Top Comp |
so 400 bucks on starter And 150 on transbrake.150 expences. So about 750 for aburn out and not even my normal burnout.I am gaining on cost per run of A/Fuel car at 2000 per run, but that isa for 5.2- 270 mph.LOL America home of free. Brought to you by 2nd amendment. | |||
|
DRR Pro |
Where is the like button!! Bruce Lee  Experience is what you get when you don't get what you want. | |||
|
DRR Pro |
 ____________________________ 2017 and 2018 Osage Casinos Tulsa Raceway Park No-Box Champion 2018 Div4 Goodguys Hammer award winner | |||
|
| DRR Top Comp |
could you enlarge that [picture not wearing readers right now. America home of free. Brought to you by 2nd amendment. | |||
|
| DRR Elite |
If you get NOTHING, no click, no spin, no nothing, then your 12v power source used to jump the starter is DEAD or the starter is not grounded. | |||
|
| DRR Top Comp |
16v at the starter topd where the clamp is. Starter grounded thru 0 cable clamped to starter block and to block at same place as the ground wire from battery. Believe me I tried connecting in hundred ways trying to make at least motor spin. Hell I wish you right. Dropped this starter at a local shop although I do not really care for them. When one choice you bite the bullet. Working on getting another in time for the next chance to run. Damn I miss it when tracks had bracket deals every weekend.You could pick from three or run all same weekend then. Now you might have chance to hit one or two a month Really think all of the cranking and cranking due to primer pump flooding(all on me) and the mag getting moved(again on me). Once I reset mag by eye it fired right up. Then had FU with primer pump flooding motor, I mean hydrauliced and would not turn till plugs out and then belching alky by cups or so it seemed. In all honesty, I am glad it did not fire off. Had simlar 30 years ago and we made 7/16 rod look like twisted pretzel. Breaking rod would be very expensive compared to a starter. America home of free. Brought to you by 2nd amendment. | |||
|
| DRR Elite |
The starter mounting block is aluminum, N/G. All you had to do was power the solenoid stud and then touch the ground cable to the back of the starter which is a steel cap or one of the bolts. | |||
|
| DRR Sportsman |
Lol nonsense, aluminum is a V/G conductor (better than steel) guess you were out that day of school. Grounding it through the aluminum starter block is fine.  | |||
|
| DRR Top Comp |
Funny it is the same block that is only part bolted to the engine when the starter is installed. The block is bolted to an aluminum mid plate Not to mention the battery ground is fastened to a big block of aluminum. America home of free. Brought to you by 2nd amendment. | |||
|
| DRR Top Comp |
Oh yea that block the battery is grounded to is same one holding all the engine stuff inside of it. America home of free. Brought to you by 2nd amendment. | |||
|
| DRR Elite |
Talk about what you know, not what you think you know jerkoff. The builder of the OPs starter and mine told me to do exactly as I have stated. | |||
|
| DRR Top Comp |
America home of free. Brought to you by 2nd amendment. | |||
|
DRR S/Pro |
Who knew a starter could be this complicated ! You must have NUKED that starter if it does nothing.... Throw it in the gaaabage | |||
|
| DRR Elite |
EXACTLY, it’s not and correct, if this brand new starter does nothing, HE fried it!!! The OP can and has broken an anvil! I don’t know what he is but he is not a bracket racer nor he’s he built a bracket car. | |||
|
| DRR Top Comp |
Exactly. It clicks some but nothing spins or engages. Heck the clicks are barely. Like I said when it comes to breaking stuff I do it right. I think it trying to spin the motor with cylinder full of fuel and deadlocked. I will be dropping pan tonight to see if any bearing got flattened from the hydraulic attempt. Might be waste but cheap and just requires little work. I am in no way saying it is the fault of Mark's product. America home of free. Brought to you by 2nd amendment. | |||
|
| DRR Sportsman |
Lol you continue to show us how you don’t know shyt. “A professional builder told me this” because you can’t think for yourself. How do you think the starter is grounded when it’s bolted to the engine block? | |||
|
| DRR Elite |
Jerkoff, Mark Payne is not only a professional at what he does, he’s a friend and competitor and when he talks about starters and alternators I listen, he’s never steered me wrong and his products are on both my cars and have been a part of our winning combination, having won numerous races, a lot of $, many Wally’s and championships that you can only dream of as you sit and bang away on your keyboard, hoping once again that this is the year after over a decade trying, that you get past 2nd round at your home shythole this weekend when they host the NHRA LODRS Divisional.   | |||
|
| DRR Sportsman |
 Keep squealing Pigley. Meanwhile, everyone with a brain knows that aluminum conducts better than steel or cast iron. | |||
|
| DRR Elite |
As usual jerkoff, your drivel is as comical as you’re driving in S/C and feeble at best. That said, I can and have rebuilt my starter and tested it and others exactly as stated and confirmed by the professional and my friend.  | |||
|
| Powered by Social Strata | Page 1 2 3 |
 | Please Wait. Your request is being processed... |
|
 |
 |
 |
 |
