DRR S/Pro
| I noticed no one has replied, so I will at least tell you what I would do. Call either Reid or some of the other suppliers and see if they will re-machine it. I know FTI did a video a while back talking about installing taller gears in pumps. Dave
"It is usually futile to try to talk facts and analysis to people who are enjoying a sense of moral superiority in their ignorance." -Thomas Sowell
|
| | | Posts: 3462 | Location: American By Birth Texan By The Grace Of God | Registered: April 29, 2004 | 
IP
|
|
DRR Trophy
| I got a new FTI pump today, The grooves in it are not too, bad I didn't think about buying a half, I know you can buy the oversize gears separate have been in need of a pump on the weekend so I thought I would rebuild this and keep for a spare Thanks for both responses... quote: Originally posted by 329L:
The BTE/TransSpecialties/FTI pump half will interchange, if they will sell you a pump half. The gears are considered "super oversized gears" How deep are the grooves in the bottom of stator tube bushing where the sealing rings ride? If it is, id throw it away and get another one.
|
| | | Posts: 134 | Location: mason,ohio | Registered: January 31, 2001 |
IP
|
|
