DRR Sportsman
| I had dealings with his dad Charlie Serra over 30 years ago when they were out side of Atlanta. Never had any trouble,he was very sharp on carb work. IHRA ACDELCO Canadian Nationals Top/et Iron man Champion 57 Don Davis Super Gas roadster SDPC 582 Head Hunter on Alcohol |
| Posts: 268 | Location: Toronto Ont/Surprise AZ | Registered: August 18, 2003 |
IP
|
|
DRR Pro
| quote: Originally posted by CURTIS REED: Obviously this isn't the dad so that has no bearing on the OP getting his money back.
100% right
"Just Shut Up and Race"
Brian Martin Martin Racing 5.50 126
|
| Posts: 1421 | Location: Va.Beach .Va | Registered: August 03, 2005 |
IP
|
|
DRR Elite
| So other than the paying up front, not getting the product and not getting the money back for months now, it sounds like a pretty good transaction?
Foxtrot Juliet Bravo
|
| |
DRR Top Comp
| quote: Originally posted by CURTIS REED: Obviously this isn't the dad so that has no bearing on the OP getting his money back.
Dead on. Not always like father like son. Sounds as if it was dad op would be 100% opposite.
America home of free. Brought to you by 2nd amendment.
|
| Posts: 4510 | Location: Greensboro NC | Registered: May 24, 2011 |
IP
|
|
DRR Pro
| If you made payment to this individual through the US Postal service you can file a Mail Fraud complaint against him also. |
| |
DRR Sportsman
| quote: Originally posted by jenavet: That is terrible and real frustrating,but I think its worse when you get your stuff in a timely fashion and the quality of work is horrid.I went through that with nickerson carbs.That dean nickerson screwed me.Quick fuel called him a butcher.Either way your always gambling when you deal with businesses that are a distance away.
Strange, he has a very good local following. |
| Posts: 698 | Location: Bucks Co Pa | Registered: January 23, 2003 |
IP
|
|
DRR Sportsman
| quote: Originally posted by Quick Dawg: So I was just about to send a carb off to Dean to be converted to alky. When I spoke with him I was impressed with the fact he was interested in setting up the complete system. I didn't get that level of interest or concern from a couple of other people I have spoken with.
Who are the most respected people to convert a carb to alky? I don't want to spend next year chasing my tail with a junk carb or system.
Id vote for Mark Whitener,helped me out with a 1095 3 circuit Demon and didn't have to pay him a dime. Just answered my questions and had a few suggestions no problems. |
| Posts: 698 | Location: Bucks Co Pa | Registered: January 23, 2003 |
IP
|
|
DRR Top Comp
| Qwickdog, You have a PM.
Clowns to the left of me, Jokers to the right. Here I am.......
|
| Posts: 5334 | Location: stuck in the middle with you! | Registered: March 11, 2002 |
IP
|
|
DRR Pro
| quote: Strange, he has a very good local following.
maybe he is good with basic stuff but mine was a dual carb all aluminum 665 making 1440...after his carb mods I tourched 2 pistons and burnt up a head. I wish he took my money and never sent me the carbs...would have been cheaper!! |
| Posts: 1433 | Location: united states | Registered: January 16, 2006 |
IP
|
|