 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
Go  | New | Find | Notify | Tools | Reply | |
| An fittings ? | Login/Join |
DRR Sportsman |
what you guys like to use when you’re making an line so as to not mar te fittings? These short AN wrenches don’t give you enough leverage when they get tight.  Michael Frizie ET 2471 | ||
|
DRR / Crew |
I like a 12" crescent wrench with duct tape on the surface. I also put antiseize on the threads and vaseline on the rubber ID. Of course Fragola is my fittings of choicee. | |||
|
DRR S/Pro |
Pretty much exactly like DRR. I have adjustable wrenches up to a 15" and have done up to 16AN that way. ____________________________ 2017 and 2018 Osage Casinos Tulsa Raceway Park No-Box Champion 2018 Div4 Goodguys Hammer award winner | |||
|
| DRR Sportsman |
I have not had any issues using GOOD AN wrenches to assemble fittings. Yes they get more difficult as the size goes up. But yes I have also used an adjustable with duct tape. Also I use the vice jaws designed for AN fittings. "I am not ashamed to confess I am ignorant of what I do not know." Marcus Tullius Cicero | |||
|
| DRR Sportsman |
I just bought Jaws also . Just looking with more leverage to tightened the fittings down with. They get awful tight as they go down . My -12 wrench is just too short to get any real pull behind it.  Michael Frizie ET 2471 | |||
|
DRR Sportsman |
I use lucas assembly lube on the threads and the barb. Working for the Weekend!!!! Fordyce Motorsports | |||
|
DRR Trophy |
If you push the hose up too far into the sleeve it will make it very hard to tighten the fitting without having a gap. | |||
|
| DRR Sportsman |
What he said...Also assembly lube is your friend. "I am not ashamed to confess I am ignorant of what I do not know." Marcus Tullius Cicero | |||
|
DRR Sportsman |
I usually use the blood from my fingers to lube everything when making up steel braided lines. 72 Nova "Hooptie" | |||
|
DRR Sportsman |
Generally put electrical tape on the jaws of my mill vise and clamp up the hose and end. Take a lid from a trans fluid bottle and fill trans fluid into the lid. Dip the other hose end nipple into the fluid and insert into the hose and end. 12" Crescent with electrical tape on the surface and tighten. When cutting: Electrical tape the hose before cutting with cutoff wheel, remove the tape, striker to burn the frayed ends, and blow out hose with compressed air. | |||
|
DRR S/Pro |
A little pricey but I bought this tool several years back and it helps a lot, especially with larger hoses https://proshop.summitracing.com/parts/hse-5416-1 And these magnetic vice jaws https://proshop.summitracing.com/parts/hse-568-2 | |||
|
| DRR Sportsman |
So this plus the Jaws for putting together the fittings ? Michael Frizie ET 2471 | |||
|
| DRR Sportsman |
And ordered! Michael Frizie ET 2471 | |||
|
| DRR S/Pro |
Yes get both. The magnetic jaws are also great for holding the hose while you cut it | |||
|
| DRR Pro |
Agreed. The AN fitting magnetic aluminum vise jaw inserts are what I use. I’m a wimp and have all I can do to get these together. I use WD-40 for the lube. | |||
|
DRR Top Comp |
I have one of these I got cheap and it is a big help in getting the hose into fitting with out losing blood. But then TomR will have to use some other kind of lubricant other than blood now. https://www.gstpautoparts.com/...t3qfdTBoCZykQAvD_BwE https://postimg.cc/gallery/np3zpruo/ "Dunning-Kruger Effect" -a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge. Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue. 4X NE2 CHAMPION. 2020 TDRA NE2 Champion | |||
|
| DRR Sportsman |
Wd-40 for the w Michael Frizie ET 2471 | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
 |
 |
 |
 |
