I had my glide gone through this winter. Went from stock case to BTE sfi case with roller tail. Put a new 1.80 planetary in as well. I put the car back together and I have no reverse and seems to make a slight chirping or sqealing when in gear. It has a pro brake, the solenoid pulls in when applying the brake. When I release the brake the solenoid doesn't push back out. I didn't drive the car but it feels like it pulls in forward gears and has nothing in reverse. BTE said it needs a blocking plate if using a stock governor support. I pulled the trans and the guy went through it finding nothing wrong. He is installing a plate but says it is not blocking anything so don't see how that can fix anything. The slight noise and fact it won't push the TB solenoid back out has me worried. It had a 2 ring powerglide spline shaft and we put a single ring turbo shaft in it. Also running a new converter. Any suggestions of what we may be missing. He is going to try get it on a dyno on Monday.