Headers - Topic

DRR Elite

posted March 22, 2018 07:01 AM

Thanks.

Great job done by Greg Holman aka REF Unlimited in Kingman, AZ. and made shiny by Gene Schaffer aka Central Connecticut Coatings.

21,000+ views on our way to 22,000 about just another set of mild steel coated headers! Dancing Cat

Posts: 13522 | Location: NJ | Registered: August 20, 2000

Ignored post by 1320racer posted March 22, 2018 07:01 AM

Wooley

DRR Sportsman

posted March 22, 2018 07:36 AM

You may want to get that hole in the diaper patched. It would be a real shame if the motor broke and the diaper tore/failed due to that. Very clean car btw. That's nice.

Posts: 525 | Location: Going to or returning from the chipmine. | Registered: July 01, 2011

Ignored post by Wooley posted March 22, 2018 07:36 AM

DRR Elite

posted March 22, 2018 08:37 AM

Thanks. There's no hole in the diaper, btw.

Posts: 13522 | Location: NJ | Registered: August 20, 2000

Ignored post by 1320racer posted March 22, 2018 08:37 AM

Stephen Hughes

DRR Sportsman

posted March 22, 2018 12:26 PM

That’s a tight squeeze, not much room for error there. Builder did a nice job!!

The Pull-Out....for when you want to work smarter, not harder!!!

Posts: 337 | Location: Texas | Registered: September 12, 2005

Ignored post by Stephen Hughes posted March 22, 2018 12:26 PM

DRR Elite

posted March 22, 2018 01:14 PM

He sure did including making the tweaks I requested in pipes 1-3-5 and 6-8

Posts: 13522 | Location: NJ | Registered: August 20, 2000

Ignored post by 1320racer posted March 22, 2018 01:14 PM

dag 1821

DRR Trophy

posted March 22, 2018 01:17 PM

tethers ?

Posts: 19 | Location: florida | Registered: December 02, 2014

Ignored post by dag 1821 posted March 22, 2018 01:17 PM

DRR Elite

posted April 09, 2018 06:21 PM

not yet

23,000+ views on our way to 24,000 about just another set of mild steel coated headers! Dancing Cat

Posts: 13522 | Location: NJ | Registered: August 20, 2000

Ignored post by 1320racer posted April 09, 2018 06:21 PM

DRR Elite

posted April 23, 2018 09:55 PM

24,000+ views on our way to 25,000 about just another set of mild steel coated headers! Dancing Cat

Posts: 13522 | Location: NJ | Registered: August 20, 2000

Ignored post by 1320racer posted April 23, 2018 09:55 PM

DRR Elite

posted May 07, 2018 07:25 AM

quote:
Originally posted by XPS fan:
I would be inclined to be more interested in how your new headers perform.

quote:
Originally posted by 1320racer:
Fred, they should perform exactly the same as the set they were copied from. The only difference is the tubing thickness with this set being heavier gauge. IIRC, went from 18 gauge to 16. Don't need no lite weight headers, ain't racing class.

Made 4 passes on Saturday, no difference in performance as I expected.

Godspeed Fred

Posts: 13522 | Location: NJ | Registered: August 20, 2000

Ignored post by 1320racer posted May 07, 2018 07:25 AM