Bracket Talk
Headers

This topic can be found at:
https://drr.infopop.cc/eve/forums/a/tpc/f/80760912/m/4287063976

March 22, 2018, 07:01 AM
1320racer
Headers
Thanks.

Great job done by Greg Holman aka REF Unlimited in Kingman, AZ. and made shiny by Gene Schaffer aka Central Connecticut Coatings.

21,000+ views on our way to 22,000 about just another set of mild steel coated headers! Dancing Cat
March 22, 2018, 07:36 AM
Wooley
You may want to get that hole in the diaper patched. It would be a real shame if the motor broke and the diaper tore/failed due to that. Very clean car btw. That's nice.
March 22, 2018, 08:37 AM
1320racer
Thanks. There's no hole in the diaper, btw.
March 22, 2018, 12:26 PM
Stephen Hughes
That’s a tight squeeze, not much room for error there. Builder did a nice job!!


The Pull-Out....for when you want to work smarter, not harder!!!
March 22, 2018, 01:14 PM
1320racer
He sure did including making the tweaks I requested in pipes 1-3-5 and 6-8
March 22, 2018, 01:17 PM
dag 1821
tethers ?
April 09, 2018, 06:21 PM
1320racer
not yet

23,000+ views on our way to 24,000 about just another set of mild steel coated headers! Dancing Cat
April 23, 2018, 09:55 PM
1320racer







24,000+ views on our way to 25,000 about just another set of mild steel coated headers! Dancing Cat
May 07, 2018, 07:25 AM
1320racer
quote:
Originally posted by XPS fan:
I would be inclined to be more interested in how your new headers perform.


quote:
Originally posted by 1320racer:
Fred, they should perform exactly the same as the set they were copied from. The only difference is the tubing thickness with this set being heavier gauge. IIRC, went from 18 gauge to 16. Don't need no lite weight headers, ain't racing class.

Made 4 passes on Saturday, no difference in performance as I expected.

Godspeed Fred