DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  General Discussion - by FTI    The OldsMopar Update
Page 1 2 3 4 
Go
New
Find
Notify
Tools
Reply
  
The OldsMopar Update
 Login/Join
 
DRR Sportsman
Picture of KWig
posted Hide Post
Damn cool ride Bender !!


You have to put in the effort, to get anything out of it.
 
Posts: 736 | Location: Cumming Ga | Registered: January 07, 2007Reply With QuoteReport This Post
DRR Sportsman
Picture of Bad News
posted Hide Post
Where in theee h ell did you ever find that top rad hose.......
Hemi in a gutlass, NFW.
Simply amazing what stuff exists.
 
Posts: 868 | Location: ft laud | Registered: September 02, 2004Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
Nice car Bender. Love the hemi
 
Posts: 329 | Location: observing the mayhem | Registered: December 22, 2014Reply With QuoteReport This Post
DRR S/Pro
Picture of CURTIS REED
posted Hide Post
Really cool. I would think this a candidate for some Mickey radials. Beard has about 3000 runs on his. Okay maybe closing in on 400.



____________________________
2017 and 2018 Osage Casinos Tulsa Raceway Park No-Box Champion

2018 Div4 Goodguys Hammer award winner
 
Posts: 3143 | Location: KIEFER, OK. | Registered: August 17, 2007Reply With QuoteReport This Post
DRR Top Comp
Picture of Curly1
posted Hide Post
I like that, it has a nice clean look and is different.


https://postimg.cc/gallery/np3zpruo/
"Dunning-Kruger Effect"
-a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge.

Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue.

4X NE2 CHAMPION. 2020 TDRA NE2 Champion
 
Posts: 4282 | Location: United States of Texas | Registered: April 02, 2011Reply With QuoteReport This Post
DRR Top Comp
Picture of Curly1
posted Hide Post
What changes did you do to pick up 2 tenths?


https://postimg.cc/gallery/np3zpruo/
"Dunning-Kruger Effect"
-a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge.

Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue.

4X NE2 CHAMPION. 2020 TDRA NE2 Champion
 
Posts: 4282 | Location: United States of Texas | Registered: April 02, 2011Reply With QuoteReport This Post
DRR Pro
posted Hide Post
Great build and first outing story Bender. What cu in is the Hemi?
 
Posts: 2675 | Location: 53056 | Registered: December 30, 2009Reply With QuoteReport This Post



DRR S/Pro
Picture of "The Bender"
posted Hide Post
quote:
Originally posted by markemark:
Great build and first outing story Bender. What cu in is the Hemi?


It started life as a 6.1, 370 cu in. It's now 420" .010 over, +.500 stroke

I do have another 420" engine build in progress, it will be much more " appropriate"..........for bracket racing.

This message has been edited. Last edited by: "The Bender",


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
 
Posts: 3103 | Location: Yes | Registered: July 08, 2009Reply With QuoteReport This Post
DRR S/Pro
Picture of "The Bender"
posted Hide Post
quote:
Originally posted by Curly1:
What changes did you do to pick up 2 tenths?


I changed to the single plane intake that's in the pictures from a dual plane and upped the launch RPM.


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
 
Posts: 3103 | Location: Yes | Registered: July 08, 2009Reply With QuoteReport This Post
DRR S/Pro
Picture of "The Bender"
posted Hide Post
quote:
Originally posted by Bad News:
Where in theee h ell did you ever find that top rad hose.......
Hemi in a gutlass, NFW.
Simply amazing what stuff exists.


A lot of people ask that, it's for a Jeep Grand Cherokee with a Hemi.


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
 
Posts: 3103 | Location: Yes | Registered: July 08, 2009Reply With QuoteReport This Post
DRR S/Pro
Picture of "The Bender"
posted Hide Post
quote:
Originally posted by ferndaleflyer:
Not enough air in the rear tires. That's a nice car for sure.....


Thanks Fern.

That's what I thought too. 9.5# in that picture, I have since gone up to 10#, but also raised the launch RPM 800....


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
 
Posts: 3103 | Location: Yes | Registered: July 08, 2009Reply With QuoteReport This Post
DRR S/Pro
posted Hide Post
Might start tightening rear shocks, double or single! Looks pretty d a. M good . You’re two stepping and flashing?


California Screaming!
Raceless in California!
 
Posts: 4659 | Location: Vacaville  | Registered: January 07, 2004Reply With QuoteReport This Post
DRR Pro
Picture of Footloose
posted Hide Post
That is cool. Big Grin What is the shift point?
 
Posts: 1922 | Location: in a van down buy the river | Registered: September 07, 2002Reply With QuoteReport This Post
DRR S/Pro
Picture of "The Bender"
posted Hide Post
quote:
Originally posted by stk 758 BP!:
Might start tightening rear shocks, double or single! Looks pretty d a. M good . You’re two stepping and flashing?


It's got non-adjustable stock type rear shocks-LOL

I'm up against the chip on the trans brake.


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
 
Posts: 3103 | Location: Yes | Registered: July 08, 2009Reply With QuoteReport This Post



DRR S/Pro
Picture of "The Bender"
posted Hide Post
quote:
Originally posted by Footloose:
That is cool. Big Grin What is the shift point?


6600


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
 
Posts: 3103 | Location: Yes | Registered: July 08, 2009Reply With QuoteReport This Post
DRR S/Pro
posted Hide Post
A very inexpensive shock- Rancho RS 9000 work great. Just make sure you get the length correct.


California Screaming!
Raceless in California!
 
Posts: 4659 | Location: Vacaville  | Registered: January 07, 2004Reply With QuoteReport This Post
DRR S/Pro
Picture of Big Steve
posted Hide Post
quote:
Originally posted by "The Bender":
quote:
Originally posted by Footloose:
That is cool. Big Grin What is the shift point?


6600

'
Brian, is that with Hyd roller lifters?
 
Posts: 2543 | Location: Moving back to the door side | Registered: April 30, 2010Reply With QuoteReport This Post
DRR S/Pro
Picture of "The Bender"
posted Hide Post
Yuppers.

I have a dyno test of another gen3 Hemi with hydraulic lifters, no problems at 7500....


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
 
Posts: 3103 | Location: Yes | Registered: July 08, 2009Reply With QuoteReport This Post
DRR S/Pro
Picture of Big Steve
posted Hide Post
Wow, Steve jr was told 6500 tops with the Morel hyd rollers in his SB mopar
 
Posts: 2543 | Location: Moving back to the door side | Registered: April 30, 2010Reply With QuoteReport This Post
DRR S/Pro
Picture of "The Bender"
posted Hide Post
I have a buddy here with an LS engine Hyd. roller shifting at 7300, with no issues


272" Spitzer
540 Chevy
The Blower Shop XR1
FTI XPM Series Converter
FTI Level 6 Powerglide
3.69@199
.916 60'

2017 Bradenton Heads Up Madness
Open Outlaw Champ

2018 PDRA T/D #5
2019 PDRA T/D #2

2020 Retired From T/D Competition....

2020 Bradenton NMCA Hemi Shootout Winner

2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
 
Posts: 3103 | Location: Yes | Registered: July 08, 2009Reply With QuoteReport This Post
  Powered by Social Strata Page 1 2 3 4  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  General Discussion - by FTI    The OldsMopar Update

© DragRaceResults.com 2024