Since getting the rubber flooring I want for trailer floor is not happening anytime soon, Figure can paint for now,Only have to unload two butt loads of stuff. Black girl butt loads too.

Thinking rustoleum best bet for good coverage, adhesion and cost.Hell worked great on roof as suggested here by a member. Almost zero steraks to clean off. Plus 60 to 90 bucks vs 800. As I see that, half set of pistons or set of ported rings now needed for them for bigger engine workking on getting parts for.

So anyone painted floor of trailer that has been used as shop too and had good amount of oil and trans fluid on it. Always cleaned ASAP but till hit floor, If so what you use for paint and cleaning. Oh yea T&G wood floor?

Plan is scrub with cleaners like purple stuff or simular, Then sao[ and water. followed by floor sander(hell sitting here) followed by Blown out 4 or 5 times. Then paint Rustoleum. Open to suggestions on paint or better cleaning to make adhere. damn sure warm enough out to dry quick,heat suck.

This message has been edited. Last edited by: wideopen231,

Better post. Proofing helps, the racers thank you.

Sounds like a good plan. Rustoleum works good on metal.

quote:

Originally posted by Larry Scarth:
Better post. Proofing helps, the racers thank you.

No proof reading. added a section after first post. Did catch 1 typo and corrected. Pia having key board at angle so can see keys bkiggest thung. Oh last two just to keep you guys on toes. Hate for you to get spoiled.

Two coats on. Second took for ever to dry. Lucky no raqind Sat. night had car out back on door. Tires sounded like rolling in heavy glued track when started in and had to back it out. On wood not metal but seems to be pretty good on all.

Hope hiolds up damn sure looks better and got to be easier to clean after long night working on lagtest bright glot to have idea to run thru mind. Most would qualify for top fuel they pass thru so fast.LOL

yea I see them hell b4 done but could not help myself.