idiot I'll continue to win rounds as I did last weekend, races, Wallys and big Checks as I have done for over 3 decades while you again attempt to get your POS to leave the starting line under power!

quote:

Originally posted by 434 olds:
Wideopen, please use this link. If this doesn't keep you occupied for hours, you have bigger problems you need to deal with.

www.pornhub.com

Hey I started a poll. Little edna started the bs. I have ignore button, but I don't back away from attack by the litle mother f--ker. I never go on his threads because I have no use for anything little dumb f--k POS has to say. All he has to do is the same. But no he has to post something to get **** started and booster his non existing self-esteem . Actually pitiful.
Again anyone who does not like my post is not forced to read. If you do not like me . Hell I am fine with that. Use the ignore button I can promise you I will not have posted anything against you or anyone else that does not attack me. Damn shame others can not say the same..

Oh by the way the more I am told not to post about something. The more I will do so. Never been good at taking orders from anyone other than mom ,dad and grandparents.

of course, you're a redneck illiterate idiot!

Rich knows it...

quote:

Originally posted by SCDIV1:
endless posts asking about mostly meaningless BS

Billy knows it...

quote:

Originally posted by BD104X:
I would say 100% of these conversation-starter posts are just a way to humble-brag about your combination consisting of obsolete alcohol hemi parts and how you made 1/2 of them by hand.

YT knows it...

quote:

Originally posted by Yellow Ticket:
I'm sorry but I gotta agree. you just to come up with fairly lame excuses for not racing.

He knows it...

quote:

Originally posted by M120:
1320 I don't know him and he don't know me, but he's not wrong.

Al knows it...

quote:

Originally posted by TOP38:
All of your posts ask this or that and 99.9% don't apply to bracket racing topics.

Last, use spell and grammar check before you post! Ya,, we all aren't spelling and grammar experts, but you take the cake for sure.

Paul knows it...

quote:

Originally posted by 434 olds:
What cracks me up with you wideopen231, you keep posting one right after another and sometimes you answer your own f u c king questions.

This message has been edited. Last edited by: 1320racer,

quote:

Originally posted by TOP38:

quote:

Originally posted by wideopen231:

quote:

Originally posted by Yellow Ticket:

quote:

Originally posted by BD104X:
I would say 100% of these conversation-starter posts are just a way to humble-brag about your combination consisting of obsolete alcohol hemi parts and how you made 1/2 of them by hand.

I'm sorry but I gotta agree.

Again all are welcome to an opinion. Although I find it hard to see point considering most say nothing about me making stuff or what my parts are from. Now when told how to do something to them that does not apply to them or possible with them. Most of the time it was about something else.Prime example this thread,the mfi pressure and fuel injector size. Non asked anything about my car.

Money for enty is not an issue and dial-in board is on the way. Then I do not remember asking for advice on what to buy or what to spend money on.

Again nobody has to click on any post that does mot interest them. Personally, I never click on carb threads for that reason.

There we go again stating we are all welcome to an opinion, but you state on all posts -
"Your first mistake was thinking your opinion made a d a m n"

For the record, 824 views and only 3 votes on your poll to date! Great tread...

You need to seek professional help soon.

All are welcomed and depending on who's opinion decides worth a damn or just a opinion. As I have stated that is for a few and most know who they are. Having the right to it and right to state it does not mean it has to be valued.

That cake i took what flavor was it? If not chocolate or cream cheese I just threw it in trash.

This place is almost as good as Yellow Bullet.

That's because the handful of idiots here came from yb first, a porn website posing as a racing website where few of the regular posters actually race and fewer yet bracket race.

Guessing edna needs the last word. Not going to happen.

I know every time I post he will have to counter with something and not doing so will drive him nuts.

Doc said to keep off this foot and keep elevated. He never said I had to be bored.

quote:

Originally posted by 183N:

quote:

Originally posted by 1320racer:

quote:

Originally posted by TOP38:
All of your posts ask this or that and 99.9% don't apply to bracket racing topics.

Last, use spell and grammar check before you post! Ya,, we all aren't spelling and grammar experts, but you take the cake for sure.

TOP38...KNOWS too this redneck illiterate idiot ain't a bracket racer nor his POS a bracket car!

Lol!!! You ain’t bracket raced in years and when you finally did last weekend, you come out with two first round losses in a row including a .200 light!!! Excellent performance!!!


On topic,
Al, the points standings are similar to a scorecard. Looking at Lebanon Valley, 4 out of the top 10 have Ron’s injection. Perhaps you can do the same for Epping and report back.

Bucky, curious why you say MFI tends to be a good bit more expensive than a carb? Are you comparing gas carb to alky mfi or alky carb to alky mfi?

Off the top of my head in Super Pro at NED I can only think of one racer running MFI and one running EFI, that's it.

At D1 TD races, only Greg Kelley runs EFI that I can think of, everyone else runs a carb(s).

At the big bucks races that I attend, I'd say that well over 95% run carbs.

I have run gas and alky carbs and alky MFI over the years I have raced. They all work when setup correctly for bracket racing. For the .90 stuff, MFI would not be my choice! It's like using a sludge hammer to drive a tack home! I have never run EFI and most likely will never run it. Our cars already have too many electronics in them, so you would have to carry all the spares because there is 99% chance other racers would not have parts that failed with EFI!

Carbs are simple and they listen to what the motor wants, EFI, you tell the motor what it wants, 99.9% of the time the motor is smarter than the tuner.

This message has been edited. Last edited by: TOP38,

Of course no one competitively bracket racing runs MFI or EFI. 99.9% run a carb(s) for good reason but again, the redneck illiterate idiot that started this thread and "endless" others "asking about mostly meaningless BS" is not a bracket racer nor his POS a bracket car.

quote:

Originally posted by wideopen231:

quote:

Originally posted by TOP38:

quote:

Originally posted by wideopen231:

quote:

Originally posted by Yellow Ticket:

quote:

Originally posted by BD104X:
I would say 100% of these conversation-starter posts are just a way to humble-brag about your combination consisting of obsolete alcohol hemi parts and how you made 1/2 of them by hand.

I'm sorry but I gotta agree.

Again all are welcome to an opinion. Although I find it hard to see point considering most say nothing about me making stuff or what my parts are from. Now when told how to do something to them that does not apply to them or possible with them. Most of the time it was about something else.Prime example this thread,the mfi pressure and fuel injector size. Non asked anything about my car.

Money for enty is not an issue and dial-in board is on the way. Then I do not remember asking for advice on what to buy or what to spend money on.

Again nobody has to click on any post that does mot interest them. Personally, I never click on carb threads for that reason.

There we go again stating we are all welcome to an opinion, but you state on all posts -
"Your first mistake was thinking your opinion made a d a m n"

For the record, 824 views and only 3 votes on your poll to date! Great tread...

You need to seek professional help soon.

All are welcomed and depending on who's opinion decides worth a damn or just a opinion. As I have stated that is for a few and most know who they are. Having the right to it and right to state it does not mean it has to be valued.

That cake i took what flavor was it? If not chocolate or cream cheese I just threw it in trash.

Wide,,

Congratulations, your responses are basic nonsense, you have now reached the same status as Mike Retread and Strange Magic, and you are officially on the Ignore list.

Up there in Div 1, US 13, there is a dragster running Hilborn injection. Has run it for maybe 50, yes 50, years and done pretty well with it. At a bracket finals a few years back at Piedmont there was a Vega running the same set up. If I remember right he won that race. Yes Stack injection!

quote:

Originally posted by TOP38:
Congratulations, your responses are basic nonsense, you have now reached the same status as Mike Retread and Strange Magic, and you are officially on the Ignore list.

TOP38...KNOWS the OP is an idiot!

only thing i ever see other than carb is Ron's toilet. 99% carb bracket and class racing. never see efi.

ep-this has been entertaining

pauley...KNOWS too! It's blatantly obvious to all with a clue that actually bracket race and have bracket cars that a carb is run by 99.9% of bracket racers.

How did I know edna would reply?

quote:

Originally posted by 183N:

quote:

Originally posted by 1320racer:

quote:

Originally posted by TOP38:
All of your posts ask this or that and 99.9% don't apply to bracket racing topics.

Last, use spell and grammar check before you post! Ya,, we all aren't spelling and grammar experts, but you take the cake for sure.

TOP38...KNOWS too this redneck illiterate idiot ain't a bracket racer nor his POS a bracket car!

Lol!!! You ain’t bracket raced in years and when you finally did last weekend, you come out with two first round losses in a row including a .200 light!!! Excellent performance!!!


On topic,
Al, the points standings are similar to a scorecard. Looking at Lebanon Valley, 4 out of the top 10 have Ron’s injection. Perhaps you can do the same for Epping and report back.

Bucky, curious why you say MFI tends to be a good bit more expensive than a carb? Are you comparing gas carb to alky mfi or alky carb to alky mfi?

May not be a fair comparison on my part. New carbs and pumps aren’t cheap either.
Maybe it’s a regional thing. I can walk past toilets in box class at every race I go to. So the 99.9% number being thrown around is crap.

quote:

Congratulations, your responses are basic nonsense, you have now reached the same status as Mike Retread and Strange Magic, and you are officially on the Ignore list.

Those 2 need straight jackets.

Agree Bucky see more Ron's stuff abound here than hat style injection. Now efi stuff is harder to see since most under hoods.
While I like hat style I will say Rons stuff pretty simple. Most could be bolted to a single plane intake with few holes tapped in runner and be ready to go.

Bucky, granted i have not crunched the numbers but i would think an electric fuel pump and a good carb is cheaper than mfi or efi. again, i have not done a price comparison so i could be way wrong.

the people i know running a toilet are very consistent and win with them. carbs these days are just as consistent though.

i say run what works for you.

ep

pauley…KNOWS!

quote:

Originally posted by Bucky:
I can walk past toilets in box class at every race I go to. So the 99.9% number being thrown around is crap.

It’s the year 2023, the vast majority of dragsters which dominate Top/Box run s 615/632 and anybody with a clue knows they run quicker, faster and consistent with a gas carb and it’s why the engines in these cars built by professionals such as PAR, Sunset, Oakley, Reher Morrison, Huntsville, The Race Shop and others, come with a gas carb. Those not running a 615/632 are running a 582 and the majority of those engines too run a gas carb. The .1 is for those that run a Ron’s terminator/toilet.