I always wanted to try this style filter. any feedback and anyone know part number for blown bbc on methanol>?

They are nice so you take apart the oil filter each change. 209-5X1 but replace the x with 3 for 35 micron, 6 for 45 micron, 7 for 75 micron. Also we always "pin" the insert so it stays with the filter when you are taking it off the engine.

Really like mine , check it after 10 to 12 hits just for peace of mind. I have caught a problem a few times , but lately motors seem to hang a lot better. Knock on wood!!!!! LOL There was a flow chart showing what weight oil verses size of micron screen to use... I can't find it sorry

I have the system 1 remote filter I'm going to be selling if you have any interest.
I switched over to the billet connection clearview filter.

Seen those they are very nice looking, but that’s a little outside my price range, but I’m do to hit the lotto any week now, and I’m sure I’ll put this on my wish list .....

thanks guys sounds like a good system,i just gotta get part number for which one I need

I prefer the racor/oberg style remote.

quote:

Originally posted by Bad News:
I prefer the racor/oberg style remote.

That looks real nice 115 micron filter,how is
the flow on it pretty good?

Been running there filters systems before they were called System One. Flawless . But you need to match your oil viscosity to the proper micron number. Call them and they can tell you the right combination.

With 10/30 in the bracket motor I ran the 30 micron with a non bypass plate. With the blown TD motor I switched to 50wt and 45 micron filter also with the non bypass plate