I've got all that except no wheel well cabinet and more options including a dragster hoist.

quote:

if only your opinion meant anything here.

Ed, you had the opportunity, as always, to respect other opinions herein an open forum. You could have easily chosen 2 other methods to respond. The first would be to not respond, the 2nd would be to say something like "I respect your opinion". Your choice was to state "your opinion means nothing". Now, whether you wonder why you're hated among all car enthusiast forums or not, this would be a real good example as to why you're so disliked by many. Many others would agree with this as well, even those that might be your small group of friends. This is your topic, be that better man for once in your life!

P.S. If you got a "new trailer" topic going, and it's a great value for the money, then you should have no problem expressing the total cost of this trailer build. If not, then many would wonder if it truly is a good value for the money.

quote:

How much is that setting you back?

Colorado Racer asked this question above.

the above comments are hilarious coming from a guy that is hated by the oldsmobile internet community, the community he claims to be all knowing. As well he is hated by his former BFF, 434 olds aka Paul Tester as well a few local racers that were duped by his bullshyt claims. Two of these guys tell me if they ever see him, they will knock him out but that's unlikely because he hasn't raced in many years with his used up POS 1600 lb. comp car and when he did, he was a wannabe go fast racer at best.

Another local racer tells me that several years ago, a racer had to be physically restrained, from giving this guy a beating.

As I've stated here many times, if you get involved with this guy, you'll get what you deserve for being naive and clueless.

Now back to my trailer.

This message has been edited. Last edited by: 1320racer,

Looking good Ed!

Nice diversion of lies, but stick to the topic Ed, as it's not uncommon for you, when you're dead wrong, to jump off topic. You where asked a simple question by Colorado racer. Price, so why are you avoiding it? Shouldn't we just stick to the trailer topic, as you say?

Your gloating about your new trailer build and show casing it on drr, and it's for two reasons, to beat your chest and stand on your own man made mountain while you make claims and put other ideas, others experiences, other manufactures and suggestions down, of which is very typical of your behavior throughout the internet. Just keeping to the facts and on this trailer discussion. Do remember it was you that was thrown off drr for your rants on the K&N hood scoop and other incidents as well. Let's not muddy up the waters herein your own topic. If you're not will to express the cost of this build, then a valid reason as to why should be mentioned. Your reason as to why you don't mention the price, is pathetic at best.

This message has been edited. Last edited by: Strange Magic,

Everything I stated about you is true and it's none of his business.

quote:

Originally posted by 1320racer:
the above comments are hilarious coming from a guy that is hated by the oldsmobile internet community, the community he claims to be all knowing. As well he is hated by his former BFF, 434 olds aka Paul Tester as well a few local racers that were duped by his bullshyt claims. Two of these guys tell me if they ever see him, they will knock him out but that's unlikely because he hasn't raced in many years with his used up POS 1600 lb. comp car and when he did, he was a wannabe go fast racer at best.

Another local racer tells me that several years ago, a racer had to be physically restrained, from giving this guy a beating.

As I've stated here many times, if you get involved with this guy, you'll get what you deserve for being naive and clueless.

Now back to my trailer.

Gossip much? Did you type that all out at a beauty salon underneath a hair dryer, cause that is some old woman gossip level stuff.

FWIW, if I was asked what I paid on a public forum for something I would not post that either. Now I might possibly respond in a PM, but probably not.

This is a screwless technology , how are panels ahearded to framing ?

quote:

Originally posted by J178RED:
This is a screwless technology , how are panels ahearded to framing ?

ahearded?

3M VHB double sided tape

I have rivets being installed on the seams

Interesting, is that normal operating procedure for them? Or did you request it?

Requested it

quote:

I have rivets being installed on the seams

Smartest move you ever made. I have seen that tape come loose in our part of the world. Good luck with the new trailer.

quote:

Originally posted by Cashflow:

quote:

I have rivets being installed on the seams

Smartest move you ever made. I have seen that tape come loose in our part of the world. Good luck with the new trailer.

That's why I asked, I have seen it too......

I did my homework and that's why this thread was started, to inform and educate about building/buying a trailer.

I agree with getting the rivets and I even agree with Ed about not wanting to discuss how much he paid.

But if you are bragging it is the best quality and value and the others are overpriced or even different dealers of same trailer are overpriced then that makes how much a legitimate question.

It is a custom trailer and is looking nice so far.

all I say as to the price is what I have said in previous threads about intech trailers...

http://www.kbtrailersales.com/

offers excellent customer service and great pricing.

Further, if you are in the market for an Intech or Vintage trailer my advice is determine exactly what you want, get your best price, then call Bryan Keller, compare apples to apples and you'll give him the order.

Oh don't forget to mention me and for a limited time Bryan will add a surcharge of 10% to your deal just because you mentioned me.

Put it in the pits and it's just another white trailer! BFD