 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
Go  | New | Find | Notify | Tools | Reply | |
| Racepak?? | Login/Join |
DRR Pro |
Purchased a used V300 system from a TD racer and since he ran a mag I need the interface wire from the MSD tach terminal to the V300. Racepak has a wire that is $$20. Is this just a wire that goes to the Moledx 3 hole plug or is there some sort of Racepak magic in the wire? Racepak PN 280-CA-HARNMSD3 Bruce Lee  Experience is what you get when you don't get what you want. | ||
|
| DRR Sportsman |
You are correct Bruce. It's just a piece of red wire out of center pin on the Molex connector for the V300sd. You can get the connectors and terminals from Mcmaster-Carr which you might need for other parts of the V300sd. There is a software setting required to change the number of pulses on a mag to regular MSD ignition too. | |||
|
| DRR Pro |
Thank you Greg. Pricey stuff these cables. Bruce Lee Experience is what you get when you don't get what you want. | |||
|
| DRR Pro |
Greg is the mini TRS plug to DB9 cable a standard cable that can be bought at Best Buy or is it a proprietary cable from RP? Bruce Lee Experience is what you get when you don't get what you want. | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
 |
 |
 |
 |
