Purchased a used V300 system from a TD racer and since he ran a mag I need the interface wire from the MSD tach terminal to the V300. Racepak has a wire that is $$20. Is this just a wire that goes to the Moledx 3 hole plug or is there some sort of Racepak magic in the wire? Racepak PN 280-CA-HARNMSD3
Bruce Lee
Experience is what you get when you don't get what you want.
You are correct Bruce. It's just a piece of red wire out of center pin on the Molex connector for the V300sd. You can get the connectors and terminals from Mcmaster-Carr which you might need for other parts of the V300sd.
There is a software setting required to change the number of pulses on a mag to regular MSD ignition too.
