DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Who uses the hard coated bearings in bbc nai s and rods
Go
New
Find
Notify
Tools
Reply
  
Who uses the hard coated bearings in bbc nai s and rods
 Login/Join
 
DRR Trophy
posted October 15, 2018 01:00 PM
Who uses the hard coated bearings in bbc nai s and rods and what's pros vs cons
 
Posts: 30 | Location: tennessee | Registered: November 29, 2008Reply With QuoteReport This Post
DRR Pro
Picture of Roger McGinnis
posted October 18, 2018 11:31 AMHide Post
Unless your having sizing issues, there are no cons.



ΜΟΛΩΝ ΛΑΒΕ
 
Posts: 565 | Location: Republic of Texas | Registered: January 16, 2011Reply With QuoteReport This Post
DRR Sportsman
Picture of David Gerard
posted October 19, 2018 06:28 PMHide Post
We have run these with no problems at all in out TD:

Rod: Clevite CB743HNK; Main: MS829HK1 [0.001” under]
 
Posts: 461 | Location: Fullerton, CA | Registered: June 08, 2008Reply With QuoteReport This Post
DRR S/Pro
posted October 19, 2018 09:37 PMHide Post
All of our motors are coated bearings and narrowed including the stock motors. There is power in bearings and coatings. If you are not looking for every last bit don’t spend for it.


California Screaming!
Raceless in California!
 
Posts: 4798 | Location: Vacaville  | Registered: January 07, 2004Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    Who uses the hard coated bearings in bbc nai s and rods

© DragRaceResults.com 2025