|
|
Go ![]() | New ![]() | Find ![]() | Notify ![]() | Tools ![]() | Reply ![]() | |
| DRR Sportsman |
Upgrading to 40 spline axles after twisting a 35 and the 4.11 in it has a lot of runs on it so time to replace that while I'm there. Sounds like we're unfortunately going to be running mostly 1/8 (g ayth) mile next year but also with some 1/4 mixed in. Considering changing from 4.11 to 4.29 and trying to get some real world feedback on how much the finish line RPM might increase at the 1/4. The math says close to 400 RPM but I know the converter will get tighter so it should be less than that. 7.40/4.70 dragster, MT 3183 tire, currently going through around 7500 at 178-179 with converter slipping 10%. Only reason for the change is to see if the 4.29 makes it any faster or more consistent. But, it's also been deadly with the 4.11 so maybe I should just stay with my current setup. | ||
|
DRR Pro![]() |
I'd stick with the same ratio, no need to change. I've always run the same setup regardless of whether I'm running 1/4 or 1/8. All that will do is add another factor you have to figure out. If you stuff is consistent as is, leave it. Mark Goulette Owner/Driver of the Livin' The Dream Racing dragster www.livinthedreamracing.com "Speed kills but it's better than going slow!" Authorized Amsoil Retailer | |||
|
DRR S/Pro![]() |
I agree leave it alone. When I had my bracket dragster I switched from a 4.10 to 4.30 gear and the only thing I noticed was my wallet was lighter. | |||
|
DRR S/Pro![]() |
I’ve been debating the same change. I lost a good .05 when I went to a 34.5” tire and wouldn’t mind having it back. I typically use the car more for S/C than anything, and not sure I want the additional RPM on the long track. Tony Leonard | |||
|
DRR Top Comp![]() |
It has been quite a few years but when I went from 4.10 to 4.30 really did not notice much difference. I think if you have the right converter it will keep your motor where it needs to be with in reason. I had always set my stuff up to run 1/4 mile and with right converter you did not give up much in the 1/8 mile. Now everything here in Texas and surrounding States is 1/8 mile except for National events. So I tried the 4.30. Your converter slip will probably go from 10% in 1/4 mile to about 18% in 1/8 mile but should remain consistent. https://postimg.cc/gallery/np3zpruo/ "Dunning-Kruger Effect" -a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge. Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue. 4X NE2 CHAMPION. 2020 TDRA NE2 Champion | |||
|
| DRR Pro |
well im the different one,it has always been 250 rpm different for me.lenny in super comp with 4.3 mine felt like a rocket when the governor turned loose. thank you, president Trump | |||
|
| DRR S/Pro |
200-250 J.R. Baxter ""Fathom the hypocrisy of a Government that requires every citizen to prove they are insured ..but not everyone must prove they are a citizen." 2025 Miller Rolla Competition Engines ProCharger Hoosier Tires Abruzzi | |||
|
| Powered by Social Strata |
| Please Wait. Your request is being processed... |
|

