Who makes the Jegs enclosed transbreak solenoids?

Most likely Trans Specialties

quote:

Trans Specialties

The one im looking at looks like the sealed FTI one but its Jegs brand.

FTI does sell a lot of stuff through Jegs.

I wonder if they make them for Jegs

Below is the Jegs & if you scroll down to items you may consider. They have an FTI; there's differences between the two.

Have you tried calling Jegs & asking?

Good thing is they state, Made in the USA!

https://www.jegs.com/i/JEGS/555/62078/10002/-1

Really useful how the specs let you know the package size. Length of throw would be the one useful spec. for this part.

THE STANDARD FTI SOLENOID IS A SHORT THROW TYPE....THEY DO HAVE A LONG THROW...TYPE LT...HUGHES USES THIS TYPE OF SOLENOID..

We don't private label our solenoids to anyone but they are available through Jegs/Summit. F2515M or F2515 for standard throw, F2515LT for long throw. If the photo is accurate the PL solenoid is the same canister solenoid we used to carry from a company we used to source them from mentioned above. Let's just say we didn't make our own solenoid because we were bored.

Shameless product plug time: the FTI solenoid is actually made from 100% billet material with double metal clad seals & o-rings for the caps to seal everything. We also improved on the coil, adding a thicker wire with more insulation and just as many windings so its just as strong with a better heat resistance and protection against shorts.

-Dalton