Who makes the Jegs enclosed transbreak solenoids?
Most likely Trans Specialties
The one im looking at looks like the sealed FTI one but its Jegs brand.
|DRR Top Comp|
FTI does sell a lot of stuff through Jegs.
America home of free. Brought to you by 2nd amendment.
I wonder if they make them for Jegs
Below is the Jegs & if you scroll down to items you may consider. They have an FTI; there's differences between the two.
Have you tried calling Jegs & asking?
Good thing is they state, Made in the USA!
Taking the Best Working Small Tire Shyt Box & making it Greater Than Before!
Pump Gas 436
Really useful how the specs let you know the package size. Length of throw would be the one useful spec. for this part.
THE STANDARD FTI SOLENOID IS A SHORT THROW TYPE....THEY DO HAVE A LONG THROW...TYPE LT...HUGHES USES THIS TYPE OF SOLENOID..
We don't private label our solenoids to anyone but they are available through Jegs/Summit. F2515M or F2515 for standard throw, F2515LT for long throw. If the photo is accurate the PL solenoid is the same canister solenoid we used to carry from a company we used to source them from mentioned above. Let's just say we didn't make our own solenoid because we were bored.
Shameless product plug time: the FTI solenoid is actually made from 100% billet material with double metal clad seals & o-rings for the caps to seal everything. We also improved on the coil, adding a thicker wire with more insulation and just as many windings so its just as strong with a better heat resistance and protection against shorts.
Competition Converters and Racing Transmissions
"Some call it cheating, we call it the competitive edge."
|Powered by Social Strata|