My Hoosier front runners lose air sitting up in my storage area of my Gooseneck too. One is worse than the other. I have never checked it for anything though, on my to-do list.
March 06, 2018, 10:22 PM
eric doukas
I run Goodyears now in the front of my cars ,I figure they would the best of the lot. My MT front runners would go flat and my MOROSO front runners also leaked down . The Goodyears never leaked and last a long time. Those Moroso front runners lasted 2 years. I had replaced a old set of Goodyears that where around 10 year old still had tread still looked good but it was time to change them . So Goodyears on the fronts from now on.
March 07, 2018, 06:31 AM
"The Bender"
quote:
Originally posted by XPS fan: Is air real expensive over there in Joysey ???
Sure is a lot of hatred for adding air over that way.
.
I don't have a problem adding air once in a while, my M/T's work great.
I guess that because they are more prone to leak than Hoosiers that makes them junk, according to some.
I will continue to run (and win with) my junk tires with my Florida air, thank you very much
Fred, are you going to be at GALOT next month?
272" Spitzer 540 Chevy The Blower Shop XR1 FTI XPM Series Converter FTI Level 6 Powerglide 3.69@199 .916 60'
2017 Bradenton Heads Up Madness Open Outlaw Champ
2018 PDRA T/D #5 2019 PDRA T/D #2
2020 Retired From T/D Competition....
2020 Bradenton NMCA Hemi Shootout Winner
2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
March 07, 2018, 07:26 AM
1320racer
the reasons are numerous and been discussed here many times before as to why emp-tees are junk.
Meanwhile, I, along with the the majority of bracket and class racers across the country will continue to run (and win with) Hoosier tires, thank you very much
March 07, 2018, 07:32 AM
"The Bender"
To each their own.
272" Spitzer 540 Chevy The Blower Shop XR1 FTI XPM Series Converter FTI Level 6 Powerglide 3.69@199 .916 60'
2017 Bradenton Heads Up Madness Open Outlaw Champ
2018 PDRA T/D #5 2019 PDRA T/D #2
2020 Retired From T/D Competition....
2020 Bradenton NMCA Hemi Shootout Winner
2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
March 07, 2018, 08:23 AM
TOP38
Man must have a broken set of MT's, mine do not leak! My air compressor in my trailer feels very lonely these days. I think it got over excited reading all of Ed's MT posts!
Bender, I will send you some MA air, along with the 14" of snow we are in for today and yours will be fine too! This message has been edited. Last edited by: TOP38,
March 07, 2018, 08:41 AM
"The Bender"
You can keep that white stuff!
272" Spitzer 540 Chevy The Blower Shop XR1 FTI XPM Series Converter FTI Level 6 Powerglide 3.69@199 .916 60'
2017 Bradenton Heads Up Madness Open Outlaw Champ
2018 PDRA T/D #5 2019 PDRA T/D #2
2020 Retired From T/D Competition....
2020 Bradenton NMCA Hemi Shootout Winner
2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
March 07, 2018, 09:37 AM
XPS fan
quote:
Originally posted by "The Bender":
Fred, are you going to be at GALOT next month?
Very likely, no XPS but seems like a good opportunity to test new PM stuff before Houston.
.
NHRA Pro Stock..........now on a no CARB diet.
March 07, 2018, 01:07 PM
I.P. Dailey
quote:
continue to run (and win with) Hoosier tires
Win! When?
March 07, 2018, 05:08 PM
Goob
LOOSIER front runners suck, as do all of their tires.
Did they stop making Moroso Drag Special 7.10-15's? I haven't had to add air since 2014, replacing the 2002 tires that held air until 2014
"Despite the high cost of living, it remains popular." Dave Cook N375
March 07, 2018, 06:37 PM
Curly1
quote:
Originally posted by I.P. Dailey:
quote:
continue to run (and win with) Hoosier tires
Win! When?
I caught that to and we all know the Truth and Facts about that.
https://postimg.cc/gallery/np3zpruo/ "Dunning-Kruger Effect" -a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge.
Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue.
4X NE2 CHAMPION. 2020 TDRA NE2 Champion
March 07, 2018, 06:45 PM
1320racer
you think you know.
Post photos of your big checks of $5k and more and post photos of your Wallys or STFU LOSER!
I would trailer you and that POS you drive every day!!
March 07, 2018, 07:15 PM
Mike Beck
quote:
Originally posted by "The Bender": You can keep that white stuff!
Ugg. Just shoveled about 6" of very heavy wet snow so I could get to my truck. 4wd low goes through anything.....
Bet Ed got close to 2 ft in NW Jersey.
Had enough of this, more coming Monday.....
March 07, 2018, 07:17 PM
1320racer
yep and it's still snowing
biggest snow fall of the season here.
March 07, 2018, 07:39 PM
XPS fan
quote:
Originally posted by 1320racer: yep and it's still snowing
biggest snow fall of the season here.
Will you be spending more time on the Internet ????
You have to warn a guy ya know !
.
NHRA Pro Stock..........now on a no CARB diet.
March 07, 2018, 07:44 PM
1320racer
March 07, 2018, 07:58 PM
"The Bender"
Oh great!
272" Spitzer 540 Chevy The Blower Shop XR1 FTI XPM Series Converter FTI Level 6 Powerglide 3.69@199 .916 60'
2017 Bradenton Heads Up Madness Open Outlaw Champ
2018 PDRA T/D #5 2019 PDRA T/D #2
2020 Retired From T/D Competition....
2020 Bradenton NMCA Hemi Shootout Winner
2021 getting back into bracket racing with a Gen3 Hemi powered 87 Cutlass.
March 07, 2018, 09:21 PM
imakehp
Hey lil' ed,
"Post photos of your big checks of $5k and more and post photos of your Wallys or STFU LOSER!"
.
. Dave
F J B
March 07, 2018, 11:16 PM
TubeCarz
Only a F A G G O T like Ed would disrespect a name like Mickey Thompson , let alone the great company that continues to do so much for drag racing .
Ya know G A Y boy putting your piece of s h i t in the parade once a year only makes you a expert d i c k l i c k e r .. nothing more
March 08, 2018, 05:11 AM
1320racer
says the pathetic old c o c k s u c k e r welder who's clearly killing it building headers...NOT in the shythole he lives and works that ain't got shyt nor ever done shyt bracket racing.
This message has been edited. Last edited by: 
