Can you use a spacer on top of a blade style throttle stop? I may need one so I can plumb a vacuum line for a fuel pressure regulator (this goes back to a previous question)
Multi-time First round runner up extraordinaire
Posts: 3883 | Location: UT | Registered: January 01, 2015
I think the question was putting a spacer on TOP of the t-stop. Answer is yes not a problem. Been there done that. Just use a 4 hole that is has the SAME dimension holes.
Originally posted by DragRaceResults: I think the question was putting a spacer on TOP of the t-stop. Answer is yes not a problem. Been there done that. Just use a 4 hole that is has the SAME dimension holes.
Yep, I have a 2" 4-hole spacer between the carb and stop. Otherwise my fuel log would hit the throttle stop linkage. Never a problem.
Tony Leonard
Posts: 5836 | Location: Inver Grove Heights, MN | Registered: March 18, 2004
Originally posted by Wallace Cleaver: Can you use a spacer on top of a blade style throttle stop? I may need one so I can plumb a vacuum line for a fuel pressure regulator (this goes back to a previous question)
Drill and tap the intake for a fitting.
I used to be a people person, but people ruined that.
Posts: 1168 | Location: Usually home | Registered: January 27, 2013
