Markemark, how do I access the data from my boost retard module when accessing the grid? I have the module installed to map crankcase vacuum but I can't remember how to pull up the data when I am looking at my recordings. Any tips/suggestions/help?

In Grid Boost Module (7762/3) go to the Data Acquisition Tab and Enable what you want recorded in Grid Data Accusation.

When attached to Grid chose Data Acquisition on the top line and then select “Recordings” and download.

Thanks, but the main issue I have is I don't see the module anywhere. I thought once it was plugged in that it would show up and it doesn't. Not sure what I'm doing wrong..

Ok I understand your problem now.

When connecting to Grid modules through CAN-bus the Ignition Switch to Grid needs to be turned ON. You also might need to allow some extended time (2 min at most) for the computer to establish this connection to the module the first time. You can also toggle the “Refresh” button in the Grid Connection Status box if the module does not show up.

Let me know if this helps.

Thanks! I'll give that a try!