We are updating our ProCharger “Slide Slinger” F3-R-112 from a 14mm 2.6” to a 3” blower belt to better handle the high 8000+ RPM loads. The original 2.6” belt is just over 75” [1905mm].

I have been looking on the internet for a 75” to 76” 14mm x 3” belt to no avail. I have only been able to find several sources for a 74.4” 14mm x 3” belt.

Can anyone out there point me to a source for the wider and longer belt?

Thanks… DG

jones has the best selection i have found (610) 847-2028

they have way more stuff than shown on the WEB

https://www.jonesracingproducts.com/#p=1

Thanks!

I will call them, but the catalog only shows a 74.4" belt as their longest!

DG

quote:

Originally posted by David Gerard:
Thanks!

I will call them, but the catalog only shows a 74.4" belt as their longest!

DG

Just put a smaller pulley on the blower lol

quote:

Originally posted by seabass:
https://www.goodvibesracing.co..._14mm.html#StarRacer

They are not far from me and I actually checked here first.
70" is the longest they have.

We need the longer belt to add length for the idler pulley we added to ensure belt clearance to the chassis on the "Side Slinger".

You might try calling Andy Wilfong at Forced Induction Supercharger Technology in La Habra.

His phone number is: (562) 665-7796.

Bob

quote:

Originally posted by RPROGAS:
You might try calling Andy Wilfong at Forced Induction Supercharger Technology in La Habra.

His phone number is: (562) 665-7796.

Bob

He referred me to Good Vibrations!

Been there, done that!

DG

Thanks, everyone for all of your suggestions.

We were able to change the Adjustment pully to a bigger diameter and use the "standard" 74.4" Kevlar 3" belt.

DG