August 07, 2019, 07:23 AM
WHOMPWHOMPLean out..
Needing my first lean out valve who makes a big one so I can get the most heat in the motor...thanks
August 07, 2019, 11:12 AM
Curly1I used a simple ball valve from hardware store.
https://postimg.cc/gallery/np3zpruo/"Dunning-Kruger Effect"
-a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge.
Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue.
4X NE2 CHAMPION. 2020 TDRA NE2 Champion
August 07, 2019, 01:17 PM
TomR1/2" ball valve from Lowe's and -8 hose on mine. Idles at 1200, open the lean out and it jumps up to @3000+
August 09, 2019, 02:04 PM
FootbrakeJimLike Tom & Bruce said, you can use a 1/2" ball valve from hardware store. Or get this stainless one from Amazon for $13.99 with free shipping, if you are a Prime member:
1/2 In Stainless Ball Valve You can find 90* mounting brackets, or fab your own.
Heck, if you want to go really cheap & easy, there are 3/8" and 1/2" plastic ones for under $5 that have barb fittings, will slip right into a rubber vacuum hose.