February 25, 2022, 04:22 PM
Mike RietowStrongest Glide Input
quote:
Originally posted by Bad News:
NASA ringless, T400 stator support.
Over 1500 runs with 1000-1300 hp @2800#
Still hanging in there, got to be 2006 when I first put it in.It was pricey even back then, about 400 bucks as I remember.
I went through 2 other ringless shafts that had serious runout when I checked them between centers, like .025-.035 across the length. They were warped badly, I assume from the heat treat.
Spot on, that's what this is.
I've found the Coan ringless is good to go as well.
Used em both high horsepower.
February 26, 2022, 07:39 AM
Paul S/Qquote:
Originally posted by seabass:
I run 1" coan ringless, never broke one yet... they will twist slightly then stop twisting...
same here... We dont have 3000 hP , but it was good enough to push the T/D to 6.0
February 26, 2022, 10:23 AM
Mike RietowWe had a Coan twist to the point it was one with the gearset.
To remove the gearset from the transmission, everything comes out in one piece.
Input, drum and gearset
Twin ProCharger 3000lb car, main man tuner from Proline doing the tuning.
1" NASA or a 1" Coan ringless would last exactly 18 full pulls down the track.