October 05, 2020, 12:26 PM
RPROGASExceldyne Belt Drive For A BBC
Exceldyne makes two series of belt drives for a big block Chevy, the Elite and the Pro. Does anyone here have experience with either? Any problems with either?
I have been offered one for $450. Would prefer an RCD but they don't exactly sell them for $450.
Bob
October 05, 2020, 04:14 PM
KennethThat is a smoking deal. The Exceldyne belt drives are very fine, either one.
October 05, 2020, 04:22 PM
Curly1When I did my research I felt the Exceldyne was the best and it has worked great. There was some things I did not like about the Jesel and some of the others were rather cheap designed and built compared to them.
https://postimg.cc/gallery/np3zpruo/"Dunning-Kruger Effect"
-a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge.
Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue.
4X NE2 CHAMPION. 2020 TDRA NE2 Champion
October 05, 2020, 04:29 PM
Big SteveI have one on my bracket 565, excellent product. Would not hesitate to buy another
October 05, 2020, 04:40 PM
RPROGASHey Steve:
You would happen to have another RCD layin' around by chance do ya?
By the way the is the Elite drive assembly and it's $450. I'll pick it up tomorrow.
Bob
October 05, 2020, 11:00 PM
RichieI have the Pro on my 632, be careful when installing crank pulley, first go-round I folded over the ext. edge of the double lip seal, poor vac. & drip. Now I expand the outer seal lip with my fingers before installing pulley...I like the set-up..