 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
Bracket Talk Bracket Talk Forum Tech Talk - by Abruzzi Electrical connection greaseGo | New | Find | Notify | Tools | Reply | |
| Electrical connection grease | Login/Join |
| DRR Top Comp |
Has anyone here used any electrical connection grease such as Nygel to help the electrical connections make better contact such as Weatherpack or Deutsch connectors? Just curious and do you think it helped? Clowns to the left of me, Jokers to the right. Here I am....... | ||
|
DRR Pro |
Vern, I used it all the time in connectors on the trash trucks. Didn't use it to improve the connection, rather to keep corrosion and other crap from forming and to help seal it. I use it on everything pretty much that will be exposed to weather at all, including on my car... Mark Goulette Owner/Driver of the Livin' The Dream Racing dragster www.livinthedreamracing.com "Speed kills but it's better than going slow!" Authorized Amsoil Retailer | |||
|
| DRR Pro |
For the pins, clean with Tuner Wash (contact cleaner) and air dry. Use dielectric grease to keep moisture and dirt out. I’ve also used DeoxIT on connectors in corrosive environments that I’ve worked at. | |||
|
DRR S/Pro |
Grease or paste of any kind doesn’t improve the contact, it just helps prevent corrosion and electrolysis. Those two things cause connections to deteriorate. The clear dielectric lube works well. I use it on a lot of things. | |||
|
| DRR S/Pro |
I have an old tube of Dow dielectric grease, but there's really nothing all that special about it, other than it's silicone grease. Or course they love to package it as many different way and up-charge if they can. Years ago OEM use to use regular white grease in light bulb sockets.  Illegitimi non carborundum | |||
|
| DRR Top Comp |
Clowns to the left of me, Jokers to the right. Here I am....... | |||
|
| DRR S/Pro |
White grease was used a lot and still is. The green corrosion, like on batteries is the worst. I’ve seen it inside weatherpack connectors a lot from moisture. The clear paste works on most everything. I use it on spark plug boots on small engines. The terminals rust inside. Onan generators too. Helps to stop the boots from really getting stuck on the plugs. Another place that really goes bad is trailer connectors and the paste helps stop that issue. | |||
|
DRR Sportsman |
Sort of along these lines, I know many who solder most connections, as I do. Make sure to clean up when finished, the flux is acidic and causes corrosion. I use alcohol to clean mine before the shrink tubing is set in place. Organized people are just too lazy to look for their $h!t. | |||
|
DRR Pro |
You're using the wrong solder then. You should only use rosin core flux solder for wiring connections - it is non-acidic and requires no additional cleaning. | |||
|
| DRR S/Pro |
I recall when RTV came into vogue back in the late 60', early 70's, some would use it for a water tight covering. Of course RTV is acidic and does all the bad things acid does to copper. Illegitimi non carborundum | |||
|
| Powered by Social Strata |
 | Please Wait. Your request is being processed... |
|
Bracket Talk Bracket Talk Forum Tech Talk - by Abruzzi Electrical connection grease
 |
 |
 |
 |
