March 13, 2021, 05:55 AM
1320racerHey just here to help those that really want help.
March 13, 2021, 06:29 AM
CashflowI believe a new set of Exstreme beadlocks (not conversions) would have set you back a little less than one Weld. I will say this, the Welds are really nice looking. I had my Americans converted, I’ll try to post a picture in the next day or so.
March 13, 2021, 07:46 AM
TonyB6255quote:
Originally posted by TD1964:
Weld Delta 1
Make sure you check for Brake caliper clearance with the Deltas depending on whose brakes you are running. My Strange cleared fine but when I switched to M/W I had to run a 1/4 spacer or you can file the outer edges of the caliper.
March 13, 2021, 08:17 AM
1320racerI run a 1/4” spacer too, mine are from Mark Williams, same as my brakes.
March 14, 2021, 09:36 AM
Cashflow
This is the conversion from 15 inch wheels to 16 inch wheels by Exstreme Fab. Very pleased with the quality, all tig welded on a rotary table with American materials. Cost for the conversion was 1245 bucks.
That did not include the finishing on the ring, I Cerakoted them myself. Sorry that the tire is not all clean and shiny but I've been thrashing trying to get ready for Vegas
