|
Go ![]() | New ![]() | Find ![]() | Notify ![]() | Tools ![]() | Reply ![]() | ![]() |
DRR Sportsman |
Started the car up and seen some sparks near the starter thought it needed to be shimmed, next i found that the TCI flexplate was hitting on the edge of the rounded steel shield. tried to pry it a lil bit and it did help same size flexplate i used all along with this midplate only a never flexplate.This message has been edited. Last edited by: JCDRAGS, | ||
|
DRR S/Pro![]() |
Flexplate on backward, by chance? I’ve done it in the embarrassingly recent past. Tony Leonard | |||
|
DRR Pro![]() |
Is this a new issue on a previously running engine? If so, check crankshaft thrust. If not take a look at Tony's ^^ suggestion. Bruce Lee ![]() Experience is what you get when you don't get what you want. | |||
|
DRR Pro![]() |
Look for run out if I am understanding correctly. TCI's cheaper plates are imported. ____________________________ 2017 and 2018 Osage Casinos Tulsa Raceway Park No-Box Champion 2018 Div4 Goodguys Hammer award winner | |||
|
DRR Pro![]() |
i hate it when that happes lol honesty is the best policy,insanity is a better deffense 1.036, 6.16@ 224 | |||
|
DRR Trophy![]() |
Stamped steel flexplates can have a lot of run out from batch to batch. Meziere Tech. Make sure your water pump is on whenever you check your coolant level. | |||
|
DRR Sportsman |
Not on backwards the converter mounting tabs are on the up side .First time its happened with 2 previous motors and all was good. | |||
|
DRR Pro![]() |
Is it radially or axially that it’s hitting? ____________________________ 2017 and 2018 Osage Casinos Tulsa Raceway Park No-Box Champion 2018 Div4 Goodguys Hammer award winner | |||
|
DRR Pro![]() |
had the converter out? | |||
|
Powered by Social Strata |
![]() | Please Wait. Your request is being processed... |
|