DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    spark plug wires
Go
New
Find
Notify
Tools
Reply
  
spark plug wires
 Login/Join
 
DRR Trophy
posted
what company is everyone using for custom length spark plug wires, i use to get them from mr.gasket during the ihra days.
 
Posts: 18 | Location: maryland | Registered: August 09, 2009Reply With QuoteReport This Post
DRR Pro
Picture of Goob
posted Hide Post
I've been using the Taylor DIY kits for years, no complaints.


"Despite the high cost of living, it remains popular."
Dave Cook
N375
 
Posts: 2040 | Location: Indy | Registered: November 21, 2008Reply With QuoteReport This Post
DRR S/Pro
posted Hide Post
https://sparkplugwires.com/

Mark Vierra owner, pro Stock racer from the past. Builds wires for a ton of fuel cars and Sportsmen. They come any color, to your measurements, insulated and numbered. Also comes with very nice wire separator's.

This message has been edited. Last edited by: BP758,


California Screaming!
Raceless in California!
 
Posts: 4891 | Location: Vacaville  | Registered: January 07, 2004Reply With QuoteReport This Post
DRR Pro
Picture of rusty
posted Hide Post
for my dragster i use scoggins and ****ey


honesty is the best policy,insanity is a better deffense
1.036, 6.16@ 224

 
Posts: 1566 | Location: texas | Registered: February 17, 2006Reply With QuoteReport This Post
DRR Pro
Picture of Alaskaracer
posted Hide Post
I buy MSD or Moroso and cut them to length myself. Got the MSD crimp tool and it works perfectly


Mark Goulette
Owner/Driver of the Livin' The Dream Racing dragster
www.livinthedreamracing.com
"Speed kills but it's better than going slow!"
Authorized Amsoil Retailer
 
Posts: 1633 | Location: Back home in Alaska! | Registered: February 13, 2011Reply With QuoteReport This Post
DRR Top Comp
Picture of Curly1
posted Hide Post
Funny you mentioned this, I just bought a set of custom plug wires.

I am building a motor using LS ignition coils but I did not want to mount them on the valve covers. So I made brackets for the frame beside the motor and put coils down there. Looks really nice but now needed custom spark plug wires.

I got them from Ton's Performance and they are really nice, highly recommend them and they were a very fair price. Got them in less than a week just like I wanted. They had to be custom length and ends.

https://tonsperformance.com/?s...S2UUtjUszbHEiKEeQXto


https://postimg.cc/gallery/np3zpruo/
"Dunning-Kruger Effect"
-a type of Cognitive bias where people with little expertise or ability assume they have superior expertise or ability. This overestimation occurs as a result of the fact that they do not have enough knowledge to know they don't have enough knowledge.

Before you argue with someone ask yourself, "Is this person mentally mature enough to grasp the concept of a different perspective?" If not there is no point to argue.

4X NE2 CHAMPION. 2020 TDRA NE2 Champion
 
Posts: 4577 | Location: United States of Texas | Registered: April 02, 2011Reply With QuoteReport This Post
DRR S/Pro
Picture of David Covey
posted Hide Post
Firecore was my last set. Need to order some new ones before it starts missing (according to the maintenance poll)...LOL

Dave


"It is usually futile to try to talk facts and analysis to people who are enjoying a sense of moral superiority in their ignorance." -Thomas Sowell
 
Posts: 3446 | Location: American By Birth Texan By The Grace Of God  | Registered: April 29, 2004Reply With QuoteReport This Post



DRR Pro
posted Hide Post
FIRECORE…
 
Posts: 1300 | Location: USA | Registered: December 04, 2008Reply With QuoteReport This Post
DRR Pro
posted Hide Post
I am a MSD 8.5 Superconductor wire fan.

Just put a set on my car and the old set was 14 years old. And if not for 1 broken wire, they all Ohm tested fine.
 
Posts: 1642 | Location: PA | Registered: February 26, 2000Reply With QuoteReport This Post
DRR S/Pro
Picture of David Covey
posted Hide Post
Just sharing some info.. When I worked for Aaron Sipple on Bissessar's TD he showed me something I had never thought of. Replace the coil wire.. Coil wire fires once for every cylinder or 8 times what the plug wire fires. I saw a coil wire totally burnt up on the ends. So he made it part of maintenance to change it out at least a couple of times a season.
Of course this was on a Mag 44 ignition system.

Just a thought..

Dave


"It is usually futile to try to talk facts and analysis to people who are enjoying a sense of moral superiority in their ignorance." -Thomas Sowell
 
Posts: 3446 | Location: American By Birth Texan By The Grace Of God  | Registered: April 29, 2004Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
Firecore. Great company great owner


"I am not ashamed to confess I am ignorant of what I do not know."
Marcus Tullius Cicero
 
Posts: 1099 | Location: Las Vegas, NV | Registered: April 14, 2004Reply With QuoteReport This Post
DRR Top Comp
posted Hide Post
Magnecor FTW


Clowns to the left of me, Jokers to the right. Here I am.......
 
Posts: 5358 | Location: stuck in the middle with you! | Registered: March 11, 2002Reply With QuoteReport This Post
DRR Trophy
Picture of rallye bob
posted Hide Post
quote:
Firecore

Firecore
 
Posts: 34 | Location: usa | Registered: December 24, 2009Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
Firecore
 
Posts: 5 | Location: indiana | Registered: September 14, 2023Reply With QuoteReport This Post



DRR Pro
posted Hide Post
Firecore here


--------------------
Bob Payton
S/P, T/D, S/C, TOP
309Z, 393, 3093, 8X93


www.apdracing.com
www.diamondracecars.com
www.callies.com
 
Posts: 2004 | Location: Michigan | Registered: November 14, 2001Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    spark plug wires

© DragRaceResults.com 2025