December 23, 2018, 12:11 AM
top189hAFR 210
Does anyone have any experience with the 210 heads? They are not the race port heads and it doesn't look like anything was done to them. What seems to be their limits before putting much work into them cubic inch and power wise?
December 23, 2018, 06:24 AM
teamI have a 23 year old set of the 210e series. I've went a 5.00 in the 1/8' with them on a 406sbc in my 4 link dragster.
December 23, 2018, 01:45 PM
Mike BeckYes, seemed to top out around the 550 hp level or so, without doing anything crazy with them. A friend of mine ran them, car went 10.60 @ 124 or so at 3400lbs. Lowish rpm engine, 7400 rpm 406 SBC.
December 23, 2018, 07:27 PM
BIG SPEEDOTB 210 Comp pkg made 610HP on 388 13.6 cr.Heads were new in 2001 lasted 3500 plus runs at which time produced a pinhole leak in exhaust port end of 2018 season.Bill C.
December 23, 2018, 07:47 PM
top189hThank you all for the feedback.
December 25, 2018, 10:18 AM
grpweld,a.k.a. your huckleberry20+ yr. old set 210's just a little pinch relief 2.08 in. Val. 421c.i., best of 10.23 3400 lbs door car