Go
New
Find
Notify
Tools
Reply
  
AFR 210
 Login/Join
 
DRR Trophy
posted
Does anyone have any experience with the 210 heads? They are not the race port heads and it doesn't look like anything was done to them. What seems to be their limits before putting much work into them cubic inch and power wise?
 
Posts: 67 | Location: Glen Burnie | Registered: May 30, 2011Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
I have a 23 year old set of the 210e series. I've went a 5.00 in the 1/8' with them on a 406sbc in my 4 link dragster.
 
Posts: 479 | Location: here | Registered: February 12, 2006Reply With QuoteReport This Post
DRR Pro
Picture of Mike Beck
posted Hide Post
Yes, seemed to top out around the 550 hp level or so, without doing anything crazy with them. A friend of mine ran them, car went 10.60 @ 124 or so at 3400lbs. Lowish rpm engine, 7400 rpm 406 SBC.
 
Posts: 1444 | Location: South River, NJ | Registered: June 19, 2007Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
OTB 210 Comp pkg made 610HP on 388 13.6 cr.Heads were new in 2001 lasted 3500 plus runs at which time produced a pinhole leak in exhaust port end of 2018 season.Bill C.


Checkered Flag Machine and Ceralli Competition Engines
checkeredflagmachine.net/
Racing engines and induction development
 
Posts: 110 | Location: Paterson N.J. | Registered: September 21, 2006Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
Thank you all for the feedback.
 
Posts: 67 | Location: Glen Burnie | Registered: May 30, 2011Reply With QuoteReport This Post
DRR Trophy
posted Hide Post
20+ yr. old set 210's just a little pinch relief 2.08 in. Val. 421c.i., best of 10.23 3400 lbs door car


65 Malibu
3150#
9"
4L65
LS3 Full steel car.
 
Posts: 52 | Location: Fallbrook | Registered: October 31, 2006Reply With QuoteReport This Post
  Powered by Social Strata  
 


© DragRaceResults.com 2024