X Block only way to go with 9 degree….1400 single four ZERO problem

quote:

Originally posted by SCDIV1:
John Asta has a Sunset engine in his S/G-S/C car and it goes 8.90 or 9.90 at 185+

I think it's a 632 but don't know what heads are on it

It made over 1300hp I believe..

1300+ hp to go 185 seems insane to me, although if going 9.90 that would truly be top of the class.

My conventional headed 632 makes a very pedestrian 1020 hp, but went 8.90 @ 184 at St. Louis in October.

back on topic

quote:

Originally posted by WHOMPWHOMP:
X Block only way to go with 9 degree….1400 single four ZERO problem

Tom, are you saying Duggins has done it and if so who bracket racing or super class racing is running it?

I know first hand that Scott's dyno is happy.

Ed your link shows Rods 1399 with single four and wet sump

Your Facebook link showed Rods engine made 1399hp these things are getting crazy

yep, looks like Joe Jolly has got a handle on this combo.

Yes DYNO is happy mine made 1430 an not a X block …I can’t think of guys name he built it for it went 4 teens…think it made close to 1500

I’ll ask him but that near 1500 number is about 100 happy

I really can’t remember but the X BLOCK was way more impressive than mine…an mine is bad azzzz

Your Kid would go high 4 teens in mine…

Look at MBE new billet intake he has come out with for these heads…bout 4 grand but it is a work of art

https://www.youtube.com/watch?v=y3B5UC7m6ms

https://www.youtube.com/watch?v=2hStZXCjGUo

Yea Matt's stuff looks good BUT does it produce the quickest/fastest time slips?

quote:

Originally posted by WHOMPWHOMP:
Your Kid would go high 4 teens in mine…

my son is 207, how much does your car weigh going down the track?

Sunset racing engines Joe Jolley and crew are top shelf good guys . I bought a 674 from them and my next motor is coming from SRE .

That MBE Manifold is sweet looking. I'll have to stick with my short 2x4 setup. My lil 9 combo makes 1300 at 7100 with little carbs. I picked my heads up from Slick Rick this past Monday. The things that guy can do with cylinder heads is amazing. He and Joe are doing some really cool stuff with 20 degree stuff.

Sounds frisky

quote:

Originally posted by 1320racer:
https://www.youtube.com/watch?v=y3B5UC7m6ms

https://www.youtube.com/watch?v=2hStZXCjGUo

Yea Matt's stuff looks good BUT does it produce the quickest/fastest time slips?

quote:

Originally posted by WHOMPWHOMP:
Your Kid would go high 4 teens in mine…

my son is 207, how much does your car weigh going down the track?

Didnt know he was that healthy I’m 250 though..

My Sunset 9 deg 648 made 1348 hp and 1040 tq with a single carb. I decided to stop trying to turn the earth to bracket race and sold that engine and Joe should have my Alum 615 SR20 done in a couple weeks.

Yup these things are impressive! Off topic but I just seen a 615 20 degree make 130 hp more than mine on the same dyno! and NOT a happy dyno.

2023 = New Combo, Aluminum Block. Should be zippy

For those without facebook. Ed this is easy to do instead of the links.