DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    NHRA rule for cut off switch on bumper.
Go
New
Find
Notify
Tools
Reply
  
NHRA rule for cut off switch on bumper.
 Login/Join
 
DRR Sportsman
posted
SO IT HAS TO BE MOUNTED ON THE BUMPER??, I WAS TOLD AS LONG AS IT HAD A BATTERY DECAL DISPLAYED AS A RED / BLACK IDENTIFIER THAT THAT WAS GONN BE OK .
 
Posts: 1655 | Location: OGLESBY,ILLINOIS,USA | Registered: April 02, 2001Reply With QuoteReport This Post
DRR Sportsman
posted Hide Post
The way I read it is that if you have a wing that extends from the trunk the switch is to be mounted on the bumper. The goal is to make the switch easier to find and reach. As a former starter and tech inspector I can tell you that the vast majority of the switches that I saw were a Pita to find and reach in a hurry. As I read it in a oem body car if the switch is mounted in the trunk area as long as you use a push/pull handle with push being off , it will be ok as long as it’s not behind the chute or tucked up under a wing. Through the tail light panel looks to still be ok. Just my opinion based on what I see.
 
Posts: 993 | Location: Going to or returning from the chipmine. | Registered: July 01, 2011Reply With QuoteReport This Post
  Powered by Social Strata  
 

DragRaceResults.Com    Bracket Talk    Bracket Talk Forum  Hop To Forum Categories  Tech Talk - by Abruzzi    NHRA rule for cut off switch on bumper.

© DragRaceResults.com 2026