|
|
Bracket Talk
Bracket Talk Forum
Tech Talk - by Abruzzi
F&L SP-3 Oxygenated Fuel QuestionGo ![]() | New ![]() | Find ![]() | Notify ![]() | Tools ![]() | Reply ![]() | |
| DRR S/Pro |
When F&L discontinued their SP-4 (non-oxygenated) I was forced switch to their SP-3, which is oxygenated. The problem is they don't list the percentage of oxygenation so increasing the jetting and air bleed sizes becomes a lengthy trial and error process. Now, with the colder weather, this may become critical. We believe the fuel is equivalent to Renegade K16 (5% oxygenation) or possible Renegade K13 (3%). Renegade recommends increasing the jetting/air bleed sizes and volume for either fuel. The question is for those folks who are running K16 or K13 how many jet size increases did you find worked the best. I just need a ballpark number. ps: Renegade Fuel isn't available here and VP is priced out of my acceptable range, F&L is the only fuel available. Bob | ||
|
| DRR Pro |
Bob, I used to race a 1988 Mustang many years ago & the car owner used F & L racing fuel in it. The car was deadly & I won a bunch of races/$$$$ with the car. I don't know how much the fuel played a factor in the wins but the owner nor I was complaining. I don't know what fuel we were using. Anyway, I looked at their oxygenated fuels & the highest I saw was 5%. I saw the SP-3 was listed just how you stated. I would jet up 2 sizes on all 4 corners & look at the plugs. I would give F & L a call, they should be able to give more information on that fuel. My fuel is oxygenated 3.7% by weight, according to Sunoco. 2BKING ![]() 1980 Camaro Taking the Best Working Small Tire Shyt Box & making it Greater Than Before! 3100 lbs. Pump Gas 436 | |||
|
| DRR Sportsman |
SP-3 as per their site shows 5%. 2-4 is a starting point for any O2 fuel The q16 on average is this. Color Yellow MON 116 RON >120 (R+M)/2 >118 Specific Gravity 0.7155 Leaded / Unleaded Leaded RVP 7.25 psi Oxygenated 9.38% Additional Info I just jet as needed. Sometimes i would just cut the plug and examine the fire ring. | |||
|
| DRR Pro |
Do you have a link to the above info? This is what I found & it's conflicting. https://racefuel.com/motorspor...ve/drag-racing-fuel/ 2BKING ![]() 1980 Camaro Taking the Best Working Small Tire Shyt Box & making it Greater Than Before! 3100 lbs. Pump Gas 436 | |||
|
| DRR S/Pro |
I contacted APD and they researched the F&L SP-3 oxygenated fuel. Their conclusion was that it's 3%. They recommended increasing both primary and secondary jets by 2-3 numbers, but leave the air bleeds alone. These figures are for the ADP Max Flow 1250. I'll begin there and read the plugs for further changes if necessary, not a problem, I'm an old school plug reader. Thanks for all the replies, I appreciate the help. Bob | |||
|
| Powered by Social Strata |
| Please Wait. Your request is being processed... |
|
Bracket Talk
Bracket Talk Forum
Tech Talk - by Abruzzi
F&L SP-3 Oxygenated Fuel Question

