|
Go ![]() | New ![]() | Find ![]() | Notify ![]() | Tools ![]() | Reply ![]() | ![]() |
DRR Sportsman |
I have a back half ladder bar car. 14.5w x 32 x 15 slicks w/stiff sidewall. 3050 lbs with me in it. 468 BBC Iron heads. QA1 90-10's on front single adjustable. Been 6.06 on its fastest pass Rear shocks are strange double adjustable. 9 or 10 clicks each of total adjustment. 95 lb rear spring. The track I'm going to go to this weekend is known to be less than mediocre. I've been reading that one an imperfect track you'd want to have the rebound tighter and compression looser. Can someone elaborate on this for me. I am trying to learn how shock settings effect a ladder bar car. Currently my plan is to be @ 7 on the rebound and 4 on the compression to start. Just trying to make a bracket car hook in the dirt. | ||
|
DRR Top Comp |
Heavier springs and lead ![]() | |||
|
DRR Top Comp |
I ran anywhere from 475 to 525 lbs of lead in the trunk of this, steel headed BBC. Dial'd guess what? 6.41 Asphalt sealer & Coca Cola for prep, back then. ![]() | |||
|
DRR Sportsman![]() |
In theory the looser compression provide more bite by allowing the shock to compress more and put more pressure on the tire; tighter rebound will keep more pressure on the tire for a longer period of time as it returns back to ride height. You could also try loosening the front shocks too. | |||
|
DRR Top Comp |
Mount lead high, behind the tire for weight transfer. ![]() | |||
|
DRR Trophy![]() |
I think you have this right, except the Extension is what allows the tire to "hit" the track harder and compression keeps pressure downwards on the tire after initial hit.. Extension is when rear end drops out of the car at the hit due to tire deformation, so looser E lets it drop quicker. Compression is then used to keep the body of the car from collapsing back downward, so tighter compression will help keep the tire planted. Nick Craig 1971 Camaro Split Bumper 376ci LS3 | |||
|
DRR Top Comp |
Compression clicker adjusts how much or how little, the tire winds on the rim. On a loose track you want the compression relatively loose to wind the tire on the rim more, for more weight transfer. | |||
|
DRR Sportsman![]() |
I think it depends on the type of car and how it works- the shocks are just one piece of the entire package. Most door cars I've seen don't have a lot of extension at the hit - like you said you can loosen the extension to give it more initial hit, but the looser extension will not keep the weight transferred and the tire planted as long and you run the risk of it trying to spin the tire after the initial hit. | |||
|
DRR Top Comp |
A Super Pro car that looks smooth and effortless leaving the starting line consists of a front end rising on the front side of flash stall and falling on the back side flash stall. This is a best natural scenario. If ya got one wheeling out to where the engine is accelerating UP to the shift, no matter how smooth the front dampers makes it look, you have an unnatural load on the engine when the tires touch down. You use the back and front dampers, to time events on the front and back side of flash stall. ![]() | |||
|
DRR Top Comp |
If you have one wheelying and touching down anywhere in the yellow on the back side of flash stall, it's a best natural scenario for 60ft consistency. ![]() ![]() | |||
|
DRR Pro![]() |
I always thought a ladder bar car seperates at the hit. Allowing quicker extension drives the slicks downward then as the weight transferred the compression is what holds the tires planted. If the car will hook at the hit loosening the front will help keep the rear hooked. | |||
|
DRR Pro![]() |
My car is similar to the OP's car. I run QA-1 double adjustable in the front and rear. Rears (24 clip range) are set full soft on compression and 19 clicks from full soft on rebound. Fronts (18 click range) are 10 clicks on compression and 13 on rebound. I run the same tires the OP does. It takes 11.5 pounds of pressure to keep the tires from cupping at the start line. nomad Bruce Guertin Easily distracted by bright shiny objects. Wife says I'm a new adventure every day. Call Automotive Performance Engines for all your complete engine building, dyno service needs 863-967-8781 | |||
|
DRR Top Comp |
The first movement shocks work to dampen is extension, the second is compression. The more the shock compresses, the more the tire winds on the rim, the longer the tire winds on the rim, the more time there is for weight transfer to occur. The lower the pickup point relative the rearend, the more natural it is for the damper to compress, be slow reacting and to transfer weight to the rear tires. Ride height is pickup point height (ladder Bar). This message has been edited. Last edited by: Mike Rietow, | |||
|
DRR Sportsman |
FWIW on our ladder bar NA10.5 car at less than stellar track, whcih we ran at least weekend, looser on the extension and compression will get the tire to plant(ext)and stay planted(comp)longer. How much and how well depends on the set up and shock. FWIW we have a 2760LB SB car on a 29.5x10.5 that went 1.131 60' with on a 95 degree day with 145 degree track temp on a less than perfect racetrack(Irwindale) last weekend. Weight bias is 56/44 fwiw "I am not ashamed to confess I am ignorant of what I do not know." Marcus Tullius Cicero | |||
|
DRR Sportsman |
Started on 7 on extension and 4 on compression, the car was initially hooking but about 100' out it looked like a pro mod kicking sideways, second time run 7 on extension and 6 on compression, a little further down track, but same result. My buddy said its not wadding the tire at all, so 3rd run I ended up at 5 on extension and 5 on compression. Car started working great! Repeated with me and him driving within 008 to the 330, 5 runs in a row. Thanks to all who contributed to this thread! | |||
|
Powered by Social Strata |
![]() | Please Wait. Your request is being processed... |
|