|
Go ![]() | New ![]() | Find ![]() | Notify ![]() | Tools ![]() | Reply ![]() | ![]() |
DRR Sportsman |
does anyone have a source for a 1/4 inch ball that has a longer stud trying to mount my throttle return spring tab and run a inline throttle stop and the standard-length stud length is just too short for my liking if you are not sure what in talking about it is similar to jegs PN 555-15729 | ||
|
DRR Top Comp |
Do you need the ball to be further out or the threaded stud longer? I think you're looking for longer threads but an Edelbrock 8016 MIGHT accomplish what you're trying to do?This message has been edited. Last edited by: imakehp, . Dave F J B | |||
|
DRR Pro![]() |
If you need longer threads, here are a couple? https://proshop.summitracing.com/parts/krc-1042 ![]() https://proshop.summitracing.com/parts/sbc-9168k ![]() ____________________________ 2017 and 2018 Osage Casinos Tulsa Raceway Park No-Box Champion 2018 Div4 Goodguys Hammer award winner | |||
|
DRR Trophy![]() |
https://www.mcmaster.com/products/ball-studs/ Meziere Tech. Make sure your water pump is on whenever you check your coolant level. | |||
|
DRR Pro |
Been using them for many...many moons! ![]() 2BKING ![]() 1980 Camaro Taking the Best Working Small Tire Shyt Box & making it Greater Than Before! 3000 lbs. Pump Gas 436 | |||
|
DRR Trophy |
I just replaced mine. Order it from Jegs part number 555-15734. I have a Biondo stop and a Lokar spring set up | |||
|
Powered by Social Strata |
![]() | Please Wait. Your request is being processed... |
|