DRR Pro
| Meziere enterprises is the pump you want! Nothing against CSR I had one. There was a guy on here that would rebuild the CSR pump, but don't remember his name. 2BKING 
1980 Camaro
Taking the Best Working Small Tire Shyt Box & making it Greater Than Before!
3000 lbs.
Pump Gas 436
|
| | |
DRR Pro
| We have a sbc & ran the 42 gpm when naturally aspirated. Then switched to the 55 gpm with the ProCharged combo. 2BKING
1980 Camaro
Taking the Best Working Small Tire Shyt Box & making it Greater Than Before!
3000 lbs.
Pump Gas 436
|
| | |
DRR S/Pro
| quote: Originally posted by ROLLIN':
Green1 rebuilt two of mine and was better than new !
Don't know if he's still around but he rebuilt 2 for me one was a CSR. |
| | |
DRR Trophy
| Meziere BBC 35gpm WP100 will work in most drag race only applications. The 42gpm will help to cool down faster between rounds. The WP300 55gpm for boosted applications is nice but only comes with a 1.75" inlet. New Meziere pumps come with a 2 year warrenty from the purchase date.
Meziere Tech.
Make sure your water pump is on whenever you check your coolant level.
|
| | | Posts: 271 | Location: Escondido | Registered: July 01, 2011 | 
IP
|
|
DRR Trophy
| quote: Originally posted by inferno camaro:
So is CSR is out of business? If so I may search for a new one for a spare before they are all gone. CSR was the only one that was short enough to clear my cooling fan.
FYI Meziere SBC and BBC 35gpm pump is 6.780" from block to the tip. The 42gpm and 55gpm are 7.280"
Meziere Tech.
Make sure your water pump is on whenever you check your coolant level.
|
| | | Posts: 271 | Location: Escondido | Registered: July 01, 2011 |
IP
|
|
DRR Pro
| quote: Originally posted by camaro77:
I called and spoke to Christine very smart and helpful my pump is 23 yrs. old I am going to send it in she told me it can be turned around in 1 day as long as it only needs bearing and a seal if it needs a motor, it's a long wait for them right now.
I think I will put this on the shelf as a spare and purchase a new Meziere in the meantime
Well that doesn't sound good. I just sent one in last week and it needs a motor. I have used them for years on my BB mopar but IMO they are not the best pump quality wise. I seem to have one go bad like clockwork every 3 years. I need to switch to a Meziere but that would require changing a bunch of stuff. |
| | |
DRR Sportsman
| Concerning the motor side of this. Have you guys checked locally for an electrical wizard/rebuilder. It's just a motor after all. Mechanical side What is in there? A bearing or 2 and a seal or o-ring? Dave Koehler - Koehler Injection - http://www.koehlerinjection.comFuel Injection - Nitrous Charger - Nitrous Master Software - Balancing 99% of fuel injection problems are electric. |
| | | Posts: 369 | Location: Urbana, IL 61802 | Registered: December 03, 2003 |
IP
|
|
DRR Sportsman
| quote: Originally posted by Dave Koehler:
Concerning the motor side of this. Have you guys checked locally for an electrical wizard/rebuilder. It's just a motor after all.
Mechanical side What is in there? A bearing or 2 and a seal or o-ring?
Green 1 is the guy no doubt. |
| | | Posts: 152 | Location: Left of Center | Registered: February 08, 2007 |
IP
|
|
DRR Pro
| quote: Originally posted by Dave Koehler:
Concerning the motor side of this. Have you guys checked locally for an electrical wizard/rebuilder. It's just a motor after all.
Mechanical side What is in there? A bearing or 2 and a seal or o-ring?
Out of desperation I actually took 2 pumps and made a good one the other week. Used the bearings out of one and pressed them on another armature and shaft. It is kind of tricky to do because the armature and windings are separate. Bearings have to be spaced correctly on shaft too.Also have to use small pieces of wire to hold the brushes in to get it back together. |
| | |
DRR Pro
| quote: Originally posted by camaro77:
if I get the meziere pump do you guys run the 35 or 50 GPH
My $500 meziere made it two weeks |
| | |
