How do you mount the Superwinch it looks like you have to unwind the cable to get to the front bolt hole but the back bolt hole is partially covered by the tray that is right under the cable.

Yes I did run the cable out to bolt it down

But could you get to the back bolt seems like that metal pan under the cable is blocking the rear bolt hole???

I bolted it down with both bolts but mine is also a 4500 I don’t remember a metal pan

There is a metal “pan” that helps guide the cable. You might have to remove it to bolt it down. Throw the cable away and put rope on it. No stored energy and no cuts on your hands.