June 23, 2018, 03:33 PM
Bigdrive88Swap Valve Body
Is it possible to swap the Valvebody in a PG on a dragster without other parts coming out. Basically just unbolt the old valvebody and bolt up a new one ? I did drop one on a 4L60E once in my Trans Am, didnt know if a PG would be the same
June 23, 2018, 03:49 PM
Larry Woodfinyes, you can do so. However, if you are unfamiliar with the PG, it would be best to have the trans upside down on a bench. The swap requires aligning the shift valve, low servo pipe, and gaskets all at once as it bolts up.
The Carl Munroe "bible"[book] would be helpful.
June 23, 2018, 03:59 PM
Bigdrive88OK. Good info thanks for the tip
June 24, 2018, 05:18 AM
wideopen231Yes can be done. After first time and seeing what yo have to do as stated above its fairly simple. Beauty of PG is simplicity.
June 24, 2018, 08:50 AM
teamIf you can do it on a 4l60e, you can do a powerglide.
June 28, 2018, 08:36 AM
Bigdrive88Sounds good. Added to the list of things to do