How much lift have you used with a roller cam ,stud girdle and rocker arms. BBC engine. Street strip car. 3600# Very limited street use maybe 3000 miles a year.This message has been edited. Last edited by: B.C.Malibu,
March 09, 2024, 07:09 PM
imakehp
Maybe a hint on what size/hp/rpm of the engine? How much weight will it be moving?
. Dave
F J B
March 09, 2024, 07:30 PM
Big Steve
Not a street car but ran for years with a RM/Erson 420-116 roller cam with stud girdles .817 int/.774 exh lift shifting around 7400
March 10, 2024, 04:53 AM
Tom396
quote:
Originally posted by B.C.Malibu: How much lift have you used with a roller cam ,stud girdle and rocker arms. BBC engine. Street strip car. 3600# Very limited street use maybe 3000 miles a year.
No disrespect intended, but the application is for bracket racing and limited street driving, correct? If so, why push it? Take care. Tom Worthington
If it seems that bracket racing has gotten too expensive for you, maybe you are just doing it wrong.
March 10, 2024, 07:31 AM
B.C.Malibu
Customer wants a “nitrous cam” installed while freshening up his engine. Car has run 8.60’s on a good track and the owner wants more. Presently is a Crower SS rocker and girdle. Bullet has recommended a cam close to .800 lift. At that point I’d switch to shaft rockers or a Yella Terra rocker.
March 11, 2024, 09:56 AM
AlkyIROC
282/290 @ .050, .833/.809 lift, 4/7 swap
Track only car. Shift around 7400
www.hardtail.com Stephen's Racing Page Best ET: 9.029 Best MPH: 150.45